Fire Feature Manual

Inspection:

This outdoor ﬁre table must be inspected regularly to insure that the product is safe to use and to

extend product life.

WARNING: DO NOT inspect this outdoor ﬁreplace until the fire is COMPLETELY out.

1. Check the burner to make sure it is securely in place.

2. Check the venturi tube to make sure it is clear and free of insects, spider nests and other

debris.

3. Check all gas connections for leaks.

4. Check the ignition system to insure proper sparking.

5. Check the components for any signs of damage, rust or excessive wear.

6. If damage to any component is detected, do not operate until the proper repairs have been

made.

General Care and Cleaning:

This outdoor ﬁreplace should be cleaned regularly to ensure safe use and extend the product's

life.

Note: After repeated use, a slight discoloration of the ﬁnishes may occur.

Fire Table Body:

Wipe exterior surfaces with a mild dish washing soap or baking soda, then rinse clean with water.

Stainless Steel Parts:

1. For general cleaning use warm water, soap, ammonia, or detergent apply with a soft cloth or

sponge.

2. For ﬁnger prints or smears use heavy duty window cleaner

3. For stubborn stains and discoloration use stainless steel cleaner and polish

Storage:

WARNING: DO NOT move or store this ﬁre table unless the ﬁre is completely out and cool

to the touch.

1. Turn gas off at the tank connection. Remove tank and store in a cool dry location outdoors

away from children.

2. Carefully remove the media and store the components ﬂat to protect them from breakage.

3. Always cover your outdoor ﬁre table when not in use with the cover unprovided with the unit.

4. Store in a cool, dry location away from children and pets.

CARE AND CLEANING

WARNING: DO NOT tamper with this appliance. This is dangerous and will void the warranty.

Any part found to be faulty must be replaced with an approved part, conﬁrmed by

manufacturer. For technical support contact us.