Manualshelf

Fire Feature Manual

ManualsBrandsOrren Ellis ManualsAll Outdoor Fireplaces & Fire PitsHarrouda Concrete Propane Fire Pit Table
11121314151617181920
16
If the burner will not light or stay lit, please perform the following checks:
1. Make sure the electrode wire is correctly connected.
Both electrode wires must be fully inserted into the igniter box.
2. Make sure that the pilot housing is unobstructed.
Clear any debris on top of the pilot housing and make sure there is no debris
between the igniter pin, thermocouple and the burner tube.
3. Make sure that the igniter pin and thermocouple are correctly positioned.
- The igniter pin should be pointed straight to the thermocouple.
- The thermocouple should be positioned 5mm away from the burner tube.
BURNER COMPONENT CONNECTION CHECKS