Fire Feature Manual

5
• DO NOT attempt to move or store this outdoor fire table until all parts are cool.
DO NOT lean over this outdoor fire table when lighting or when in using.
• Use only the regulator and hose assembly provided. The replacement regulator and hose
IMPORTANT SAFETY INFORMATION (CONTINUED)
assembly shall be that specified by the manufacturer.
DO NOT attempt to disconnect the gas regulator from the tank or any gas fitting while the
outdoor fire table is in using.
ALWAYS shut off gas supply at the tank valve or gas fitting and disconnect regulator from the
tank when the re table is not in using.
ALWAYS shut-off the gas supply at the tank valve or the main gas supply when the fire table is
not in use.
• DO NOT sit on the mantle when the unit is in operation.
• DO NOT throw anything onto the fire when the unit is in operation.
Lava rocks are very hot; please keep the children or pets away at a safe distance.
• It is essential to keep the outdoor fire table valve compartment, burners, and circulating air
passages clean. Inspect outdoor fire table before each use.
•Prior to each fire table operation, check the hose for evidence of excessive abrasion or wear by
looking through the visual check hole. If the hose is damaged, cracked or cut, it must be replaced
before using the gas fire table. The hose assembly can only be replaced with a hose assembly
specified by the manufacturer.
• Before each use, remove the lava rocks. Examine the burner and its components. If dirty, clean
with a soft brush and soapy water solution. Examine the area around the burner; any dirt or
foreign material, such as spider webs or nests in this area should be removed. If it is evident that
the burner is damaged, the re table must not be used. The burner assembly cannot be replaced.
Please contact us for technical support.
• Place the hose out of the pathways where people might trip over it. Do not place the hose in
areas where it may be subjected to accidental damage.
ATTENTION: Any alteration of the outdoor fire table that is not specifically directed in the
operations manual will void manufacturer warranty.