Installation & Assembly

Note: The arms on the fixture cannot be rotated 360°
PLEASE READ AND SAVE FOR FUTURE REFERENCE.
CAUTION
1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock.
2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are
unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
WARNING
1. Most home outlet boxes will support 35 pounds or less. To install this fixture, the outlet box and the supporting structure the
outlet box is attached to MUST be capable of supporting 20 pounds or more.
2. The safety cable MUST be used during installation. The safety cable must be attached to a ceiling joist or other permanent
structure independent from the outlet box. Failure to follow these guidelines will void warranty and could result in injury,
severe damage or death. If in doubt, consult a qualified electrician for installation of the fixture.
3. Do NOT tamper with or attempt to repair LED component of fixture.
GENERAL
Remove all parts and hardware from the box and make sure that none are missing by referencing the illustrations provided.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PENDANT:
1.OUTLET BOX (not included)
2.SUPPLY GROUND WIRE (not included)
3.
WASHERS (pre-attached to outlet box)
4.WHITE SUPPLY WIRE (not included)
7.SMOOTH (or BLACK) FIXTURE LEAD WIRE
12.OUTLET BOX SCREWS and
8.RIBBED (or WHITE) FIXTURE LEAD WIRE
9.MOUNTING PLATE (pre-attached)
6.FIXTURE GROUND WIRE
5.WIRE CONNECTORS
10.GROUND SCREW (pre-attached)
11.COLLAR LOOP
14.RING
13.CANOPY
15.
FIXTURE
BLACK SUPPLY WIRE (not included)
15
Pendant LED spiral mini pendant

Summary of content (2 pages)