Owner Manual

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly Product Dimensions:20.08“W*16.54“D*29.92“-39.37“H

* This item may require periodic tightening

PIECE

LENGTH

QUANTITY

A 1X

B 1X

C 1X

D 1X

E 1X

H1 M10*30mm 3X

H2 M6*15mm 4X

H2.1 M6*15mm 4X

H3 1X

H4 1X

Φ25*5*Φ8 2X

Allen key S

Allen key L

Footrest

Allen bolt M (For column)

Allen bolt M (For foot-rest)

Allen bolt L (For base)

Base

Gaslift

Column

CARE AND MAINTENANCE

Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner.

Test the cleaning method on a hidden area before using them over the entire area .

NOTICE

Part List and Hardware List

Spare black plastic cap

DESCRIPTION PICTURE

SEAT

PAGE 1
CARE AND MAINTENANCE Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner. Test the cleaning method on a hidden area before using them over the entire area .
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included): Allen Key 1 33 32 Step 1 Align the gas lift (C) onto the base as pictured. Use allen key “H3” to lock the 3 screws “H1”. Step 2 Remove the black cap on the top of the gas lift.