USE AND CARE GUIDE 3 LIGHT VANITY Questions, problems, missing parts? Before returning to the store, call our Customer Service. THANK YOU We appreciate the trust and confidence you have placed in us through the purchase of this vanity.We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information ....................................................................................................................................... 2 Warranty ...................................................................................................................................................... 2 Pre-Installation ............................................................................................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This vanity requires the use of three 120V, 60Hz, 60-Watt max, medium-base type A bulbs (not included). Do not exceed the recommended wattage.
Pre-Installation (continued) PACKAGE CONTENTS A B C Part Description Quantity A Socket ring 3 B Glass shade 3 C Fixture body 1 4
Installation instructions 1. Installing the mounting plate CAUTION: Ensure the power is off at the main fuse box prior to beginning installation . □ Turn off the switch at the wall. □ Turn the power off at the main fuse box. □ Attach the mounting plate (BB) to the outlet box using the outlet box screws (CC). CC BB 2. Connecting the wires □ Install the fixture bare copper wire (1) under the ground screw (EE) on the mounting plate (BB).
Installation instructions (continued) 3. Hanging the fixture body □ Raise fixture body (C) to the wall and carefully tuck the wires inside the outlet box. spread the electrical splices so that the black wires are on one side of the outlet box and the white wires are on the other side. line up screws with holes in backplate and secure with two finials (DD). (Important note: This vanity can be mounted up or down, make sure mount the fixture body (C) to wall as you desired). DD Backplate C 4.
Installation instructions (continued) 5. Assembling the bulbs □ Prior to installing the bulbs, please inspect sockets for silica packet, if packet is present, remove and throw away, do not expose to children and pets. □ Install one 120V, 60Hz, 60-watt max. medium-base type A bulb (not included) into each socket of the light fixture. Bulb (not included) Socket Care and Cleaning □ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
