Installation & Assembly

ASSEMBLY AND INSTALLATION
1.Shut off the power.
2.Use two Junction Box Screws to fix the Mounting Back Plate on the Outlet Box.
3. Connect supply wires to fixture wires and insulate with proper size wire nuts.
a) Connect ground wire (green or bare) to fixture ground wire (green or bare).
b) Connect common (white) wire to fixture common(white).
c) Connect hot (typically black) wire to fixture black wire.
4.Place the Fixture on the mounting plate and secure with two cap nuts.
5.Use the Bracket hold the waterproof washer onto the Fixture and fixed with two Mounted Screws.
SAVE THESE INSTRUCTIONS AND WARNINGS.
This product is designed for dimming with many 120V Leading
Edge(LE) and Trailing Edge(TE)phase control dimmers.compatible
with most residential type dimmers available on the market.The dimming
performance will depend on kinds of dimmer and dimmer settings.(not provided).
INSTALLATION INSTRUCTIONS
LED FLUSH MOUNT LIGHT
Outlet Box(not included)
Outlet Box Mounting Screw
Mounting Screw
Ground Wire
White Wire
Black Wire
Wire Nut
Mounting Plate
Fixture