Owner's Manual

10
”
OPERATING INSTRUCTIONS
1.Firstly, turn on the power switch on the right side of the fireplace, which can provide the power supply to
all the function of the fireplace. Only in the state of mode I, the function will be operated, including the using
of remote control.
Press the power key on the remote control, at this time is to open
the heating function and flame effect. Then press the power key,
the heating function and flame effect will stop work (fan will
close after delaying 30 seconds), and enter standby state.
2.Adjust the flame brightness
In standby mode, press the fire key, you can appreciate the flame effect.
Or
In standby mode, press the button, a flame will open flame
function。Charcoal fire will light， In turn, press the fire button
will open 10 different flame effect。 then press the button will turn
on the flame circulatory function. press the button again will close
the flame function
D
E
F
G
H
I