Owner's Manual

11
3.heating the low mode
In standby mode, press the heat key of the first gear and can be opened the heating function.
Or
In standby mode, press the heat key on the control panel or remote
control, the heating function is turned on (the heat indicator will light
up).Then press the heat key on the control panel or remote control
again, the heat function and the heat indicator are closed, at
meanwhile, the fan will close after delaying 30 seconds.
4.heating the high mode
In standby mode, press the heat key of the second gear and can be opened the heating function.
Or
In standby mode, press the heat key on the control panel or remote
control, the heating function is turned on (the heat indicator will light
up).Then press the heat key on the control panel or remote control
again, the heat function and the heat indicator are closed, at
meanwhile, the fan will close after delaying 30 seconds.
MAINTENANCE
1. Turn off the heater of the power switch.
2. Unplug the unit and let it cool completely.
3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a
mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT
let liquid enter the heater.
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water.
6. Wait until the unit is completely dry before use.
7. If won’t use the unit for a long time, please take out battery in remote control according to
following steps, then take care of the remote control.