Owner's Manual

12
The method for removing the remote control battery is shown below; hold the battery card buckle, pull it
out, and then remove the battery.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the
original packaging to repack the unit.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair advice:
1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the main power switch (in the back) is working.
3. Check the power switch is on
PUSH
RELEASE
OPEN