Owner Manual

Note : The instructions here assumes you install from the top left corner. The same instruction can be used for other
layout as well.
• On the wall you want to install the panel, visually inspect the corner where
the ceiling meet the wall. Identify the lowest point of the ceiling. (It is
common to have a ceiling that is not perfectly level or even)
• Put a panel up against (leave about 1/8” space) the lowest point of the
ceiling and mark the height of the panel.
• From the marking, draw the level horizontal line across the wall with the help
of the level.
• This way you don’t have to cut any of the top row panel when install up
against the ceiling. Since it is high up and the gap is small, it won’t be visible.
• If the gap between the panel and the ceiling is too visible (not likely), you
may need to fill it in with additional panel.
• Draw one level horizontal lines for each row of panels.