User's Manual

Wireless Multimedia Keyboard And Optical Mouse

3. Setting Wireless Multimedia keyboard and Program

A. Make sure the receiver cable (purple) is plugged into the PS/2

keyboard port and the other cable (green) is plugged into the PS/2

mouse port.

B. Establish communication between the receiver and the keyboard.

There is an ID button on the top of the receiver; bottom of the

keyboard.

C. Press the ID button on the receiver first; then the receiver’s ID LED

will flash. Then press the ID button under the keyboard. The

receiver’s ID LED will accelerate flashing; it means the keyboard’s

setting up is completed.

NOTE: When you replace the batteries, remember to reset again!

ID Button