User's Manual

Wireless Multimedia Keyboard And Mouse
16
C. Press the ID button on the receiver first; then the receiver’s ID LED
will flash. Then press the ID button under the mouse. The receiver’s
ID LED will accelerate flashing; it means the mouse’s setting up is
completed.
NOTE: When you replace the batteries, remember to reset
again!
Setting Program:
This section describes how to use the Wireless Ergo Optical Mouse setting
program. Once the software installation for the Wireless Ergo Optical
Mouse is completed, the icon
is shown on the Windows

taskbar. Right
click on the (Ergo Optical Mouse Icon) to activate a menu with options to
configure the Magic Function Software.
5-1. Magic Function: Configuration tool provided for you to design the
mouse functions.
5-2. Mouse Buttons: There are 4 buttons of Magic function for Wireless
Ergo Optical Mouse. And you can select the functionality of these
buttons.
5-3. Function Assignment: There are totally 27 functionalities listed as
the following and you can select one of them easily in this drop-pop
menu.
1.Calculator 2.Copy 3.Copy/Paste 4.Control Panel
5.Cut 6.Display Property 7.Dos Shell 8.Eject
9.Email 10.Enter 11.File Explore r 12.F1-F12
13.Media Wheel 14.My Document 15. My Shortcut 16.Next Track
17.Paste 18.Play/Pause 19.Previous Track 20.Property
21.Screen Saver 22.Stop 23.Switch Window 24.System Property
25.Undo 26.Volume Control 27.WWW
5-4. Load Default Setting: Easily for you to get the Default Setting of
Media Wheel