Bluetooth Notebook Optical Mouse User’s Manual 0
About This Manual This manual is designed to assist you in installing and using the Bluetooth Mouse. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Edition 1st Edition, Copyright © Copyright 2008 This document contains proprietary information protected by copyright. All rights are reserved.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
System Requirements Microsoft® Windows® 2000/XP/Vista compatible Build-in Bluetooth module or Bluetooth dongle. Device pairing Widcomm software: 1. Right click on the BT icon and choose “Explore My Bluetooth Places” 2. Press the ID button at back of the Bluetooth Mouse. 3. Click the “Search for devices in range” option, the “Bluetooth Mouse” will be found. 4. Double click on the “Bluetooth Mouse” icon, it will pop-up another windows. Just follow the screen display then click “OK” .
. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. 6. The Bluetooth icon will become to . The Bluetooth Mouse is ready to use. Toshiba software: 1. Right click on the BT icon and choose “Add New Connection” 2. Press the ID button at back of the Bluetooth Mouse. 3.
4. Choose the “Bluetooth Mouse” device and click “Next” 5. Just follow the screen display then click “OK” . 6. Click “Next”. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. 7. The Bluetooth icon will become to . The Bluetooth Mouse is ready to use. IVT Software: 1. Press the ID button at back of the Bluetooth Mouse. 2. Double click the BT icon on the system tray and it wills pop-up a windows.
3. It will find the “Bluetooth Mouse” device. Right click on the Bluetooth Mouse icon and choose “”Connect” → ” Bluetooth Human Interface Device Service” 4. Just follow the screen display then click “OK”. 5. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. 6. The Bluetooth icon will become to to use. 6 .