User's Manual

Wireless Multimedia Keyboard And Mouse

Right-click the button of UI to bring the Magic Function setting

dialog box.

TROUBLESHOOTING

If you have any problems using the Wireless Multimedia keyboard and

optical Mouse, please consult the Troubleshooting Guide below to see if

your problem is listed.

 Wireless Product Does Not Work

• Make sure you have connected the receiver correctly (please refer

the setting up a wireless optical mouse).

For optimal

performance, place the receiver at least 8 inches or 20

centimeters away from other electrical devices, such as the

computer, the computer monitor, or external storage drives.

• Make sure you have installed the batteries correctly. Check to

make sure the batteries you have installed are not dead. Try the

batteries in another device.

• If you are working on a metallic surface, try moving the receiver

closer to the mouse or standing the receiver on its side.

• Try unplugging then reconnecting the receiver cable to the

computer.

 Wireless Product Is Not Detected

• Make sure the receiver cable (purple) is plugged into the PS/2

keyboard port and the other cable (green) is plugged into the PS/2

mouse port .

Do not plug or unplug the receiver cable while the

computer is running.

• In Windows you may have other system devices that conflict with

the mouse, trackball, or keyboard. Check the IRQ/address settings

of these devices for conflicts, and change the settings as required.

Refer to your computer documentation to make these changes.