Wireless Mobile Keypad User’s Manual Version: 1.
Federal Communications Commission Statement Notice 1 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. Notice 2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Introduction This manual is designed to assist you in installing and using the Wireless Keypad. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. System Requirements Microsoft® Windows® 98/Me/2000/XP and MAC OS. One USB v. 1.1 or 2.0 Compliant Port Installation Connection with Windows®98/Me 1. Plug the USB receiver connector to your PC. 2.
Connection with Windows 2000/XP 1. Plug the USB receiver connector to your PC. 2. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. You are now ready to begin using your wireless keypad Connection with MAC OS Plug the USB receiver connector to MAC then you can start to use your wireless keypad. ID setting There are two methods for receiver to enter “Setup phase”. 1.
Power Switch: There is a power switch at back of the keypad. If you don’t use the keypad, you can switch it to OFF to save the battery. Keypad feature description: Normally, when users input numbers from a USB keypad, the notebook’s Num Lock function will be enabled as well. Users have to disable Num Lock function before inputting characters from a notebook. The enable and disable process will always showing every time when users input numbers from a keypad and it is cumbersome for all the users.
Keys description: Key location 1 End 2 3 ↓ PgDn 4 ← 5 6 7 → Home 8 9 ↑ PgUp 0 Ins 00 Usage Num Lock ON: Keypad 1 Num Lock OFF: End Num Lock ON: Keypad 2 Num Lock OFF: ↓ Num Lock ON: Keypad 3 Num Lock OFF: PgDn Num Lock ON: Keypad 4 Num Lock OFF:← Num Lock ON: Keypad 5 Num Lock OFF: No function Num Lock ON: Keypad 6 Num Lock OFF: → Num Lock ON: Keypad 7 Num Lock OFF: Home Num Lock ON: Keypad 8 Num Lock OFF: ↑ Num Lock ON: Keypad 9 Num Lock OFF: Pg Up Num Lock ON: Keypad 0 Num Lock OFF: Ins Num Lock
. Del / * + Enter Bk Sp ← Num Lock Num Lock ON: Keypad .
Specification of WKP-100 Operation Force 55±15gm Weight 150gm Total Travel 2.
