Wireless Calculator Mobile Mini Keypad WKP-290 User’s Manual Version: 1.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT Notice 1 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. Notice 2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Introduction Congratulations on your purchase of the Wireless Calculator Mobile Mini Keypad.. It makes the calculation process more easily and more convenient. System Requirements Microsoft® Windows® 98/Me/2000/XP and MAC OS X compatible One USB v. 1.1 or 2.0 Compliant Port Installation Connection with Windows®98/Me 1. Plug the USB receiver connector to your PC. 2. The Add New Hardware Wizard appears. 3. Click Next. The locate driver screen appears. 4.
Windows 2000/XP Operating System 1. Plug the USB receiver connector to your PC. 2. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. You are now ready to begin using your wireless keypad MAC OS X 1. Connect the keypad to your MAC. 2. The MAC OS will install the driver automatically. No other steps are necessary.
ID setting Plug the receiver into your notebook’s USB port and turn on the wireless keypad. The keypad and the mouse will connect with the receiver automatically. If not, press the ID button at the back of the keypad, then the ID setting is accomplished. Repeat the same step for the mouse ID setting. z Description of the function keys Key Definition Functions M+ M- Adds the current display from the content of memory. Subtracts the current display from the content of memory. I.
+/- Switches the sign of the displayed value between positive (+) and negative (-). I. Use this key in combination with arithmetic % operator keys to perform percent. II. Setting TAX rate. MODE SEND + = Change mode between the calculator and the keypad status. Send the calculation result to PC when the device is in calculator mode or in keypad mode. Num Lock ON: Input symbol “+”. Num Lock OFF: Input symbol “=”.
characters from a notebook at the same time. Especially, it doesn’t need any drivers and support Plug & Play. Users just need to plug it into the USB port, and then users can use it smoothly. This new wireless keypad also can use under PC or MAC without any driver. It can detect the PC or MAC system automatically, no other steps needed. About the Display The display shows the number you input, calculation results, and various indicators showing the status of the calculator.
0,2,4 A Number of decimal places for the 5/4 setting of the Rounding Selector. The “Add Mode” automatically adds a decimal point and two decimal places to all values, even if you don’t input a decimal point. This mode is very useful when performing calculations in dollars or other monetary systems that require two decimal places. Two decimal places are not added in this mode if you press the DEL key while inputting a value, or for any operation other than addition and subtraction.
Specification of WKP-290 Operation Force 60±15gm Weight 130gm Total Travel 2.
Troubleshooting When you turn on the keypad, if the keypad’s LCD shows abnormal or nothing, check your battery first. If the battery is working fine, try to find an acicular metal and plug into the reset hole (at the back of the keypad). Then the keypad will work normally. If the problem was still unsolved, please contact the technical support. Battery LED Status Battery Low: LED flash (0.4 sec ON, 0.
