Wireless Mobile Mini Keypad User’s Manual Version: 1.
Federal Communications Commission Statement Notice 1 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. Notice 2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Introduction This manual is designed to assist you in installing and using the Keypad. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. System Requirements Microsoft® Windows® 98/Me/2000/XP/Vista compatible One USB v. 1.1 or 2.0 Compliant Port Installation Connection with Windows®98/Me 1. Plug the USB receiver connector to your PC. 2.
Windows 2000/XP/Vista Operating System 1. Plug the USB receiver connector to your PC. 2. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. You are now ready to begin using your wireless keypad ID setting Plug the receiver into your notebook’s USB port and turn on the wireless keypad. Pressing the ID button on the receiver, then the ID setting is accomplished.
characters from a notebook at the same time. Especially, it doesn’t need any drivers and support Plug & Play. Users just need to plug it into the USB port, and then users can use it smoothly. This new wireless keypad also can use under PC or MAC without any driver. It can detect the PC mode or MAC mode automatically, no other steps needed.
Specification of WKP-3250 There is a power switch at back of the keypad. To save the power, you can turn it off when you don’t need to use it. Operation Force 50±15gm Weight 100gm Total Travel 2.2 mm Operation Frequency 27 MHz/ 1 communication channel/ 1.5M distance Battery type 1 * AAA Nickel-Metal Hydride battery Dimension: L×W×H 115 x 75 x 21.
