Wireless Keypad For Notebooks User’s Manual Version: 1.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Introduction Congratulations on your purchase of the Wireless Keypad. This new wireless keypad combines Excel, Calculator and WWW hotkeys. It makes the calculation process more easily and more convenient. System Requirements Microsoft® Windows® 2000/XP/Vista and Microsoft Office One USB v. 1.1 or 2.0 Compliant Port Installation Windows 2000/XP /Vista Operating System 1. Plug the USB receiver connector to your PC. 2. The Found New Hardware Wizard appears and the OS will install the driver automatically.
Using the Wireless Keypad Turning the keypad Off and On Just take out the receiver, the keypad will turn on. To turn it off, just stow the receiver into storage. We design this function to save the power. ID setting Plug the receiver into your notebook’s USB port and press the ID button at the back of the keypad, then the ID setting is accomplished.
Starts the default Web browser and goes to the home page Switch keypad Num lock On/Off Special Function: This new keypad has no synchronized problem; users can use the keypad and inputting characters from a notebook at the same time. Especially, it doesn’t need any drivers and fully support Plug & Play. No matter the Host’s Num Lock function status, users can choose the Num Key or direction key on the keypad. When users press the keypad’s Num Lock key once, it can change the keypad’s Num Lock status.
Specification of WKP-3270 Operation Force 60±15gm Weight 130gm Total Travel 2.
