2.4G Wireless Keypad User’s Manual WKP-3290 Version 1.
About This Manual This manual is designed to assist users in installation and usage of the Wireless Keypad. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Edition st 1 Edition, Copyright © Copyright 2013 This document contains proprietary information protected by copyright. All rights are reserved.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARNING A shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 15.
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1. INTRODUCTION Thank you for purchasing the Wireless Keypad. This User’s Manual contains information that will help to operate the keypad as well as answer questions about certain special keys and buttons. Please keep this manual in a safe place for future reference. 2. System Requirements ® Microsoft Windows 2000/XP/Vista/7/8 3. Installation Connect the receiver to PC USB port. “New Hardware Found” will display. Place the battery to keypad and turn it on. Start using the Wireless Keypad.
5. Keypad feature description Normally, when users input numbers from a USB keypad, the notebook’s Num Lock function will be enabled as well. Users have to disable Num Lock function before inputting characters from a notebook. The enable and disable process will always show every time when users input numbers from a keypad and it is cumbersome for all the users. If users want to solve this problem, they need to install a driver.
6. Keys description Key location 1 End 2 ↓ 3 PgDn ← 4 5 → 6 7 Home 8 ↑ 9 PgUp 0 Ins 00 .
* + Enter Bk Sp ← Num Lock Num Lock ON & OFF: Keypad * Num Lock ON & OFF: Keypad Num Lock ON: Keypad + Num Lock OFF: No function Keyboard Return Keyboard Back Space Keypad Num Lock 7. Troubleshooting Wireless Product Does Not Work Make sure the receiver is connected correctly. Make sure the battery is installed correctly Check to see if the battery power is dead. Please unplug then re-plug the receiver, then press the ID button at back of the keypad for re-pairing.
