Bluetooth Keypad User’s Manual WKP-3290M 0
About This Manual This manual is designed to assist you in installing and using the Bluetooth Keypad. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Edition 1st Edition, Copyright © Copyright 2014 This document contains proprietary information protected by copyright. All rights are reserved.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
System Requirements MAC OS X. Build-in Bluetooth module or Bluetooth dongle. Device pairing 1. Click on the Apple icon and choose “System Preferences” 2. Click on the Bluetooth option.
3. Click the “Set Up New Device” . 4. Click the “Continue” button.
5. Press the CONN button at back of the Bluetooth keypad, then the led will start flashing. Choose “Keyboard” and click the “Continue” button. 6. Choose “Bluetooth Keypad” and click the “Continue” button.
7. Just follow the screen display to input the Passkey then press “enter” (the keypads enter) 8. Click the “Quit” button. The Bluetooth keypad is ready to use.
Power Switch There is a power switch at back of the keypad. When not in use, please turn to OFF to save battery power. Note: 1. After 30 minutes non-operation, the keypad will go to lowpower mode. Please press any key to wake up and wait the blue LED turn off before using. 2. Power ON/OFF also need to press any key to reconnect and wait the blue LED turn off before using. 3. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
