Bluetooth Keypad User’s Manual WKP-7110BT Version 1.
About This Manual This manual is designed to assist users in installation and usage of the Bluetooth Keypad . Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Edition 1st Edition, Copyright © Copyright 2015 This document contains proprietary information protected by copyright. All rights are reserved.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARNING A shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 15.
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1. INTRODUCTION Thank you for purchasing the Bluetooth Keypad. This User’s Manual contains information that will help to operate the keypad as well as answer questions about certain special keys and buttons. Please keep this manual in a safe place for future reference. 2. System Requirements Microsoft Windows® XP / Vista/Windows 7/8 • 3. Device pairing z Turn on the Bluetooth connection on the notebook computer z Turn on the keypad power and press the “CONN.” button.
Note: 1. After 30 minutes non-operation, the keypad will go to low-power mode. Please press any key to wake up. 2. Power ON/OFF also need to press any key to reconnect and wait the blue LED turn on before using. 4. Power Switch There is a power switch at back of the keypad. When not in use, please turn to OFF to save battery power. 5.
↑ 9 PgUp 0 Ins 00 . Del / * + Enter Bk Sp ← Tab Num Lock ON: Keypad 8 Num Lock OFF: ↑ Num Lock ON: Keypad 9 Num Lock OFF: Pg Up Num Lock ON: Keypad 0 Num Lock OFF: Ins Num Lock ON & OFF: Keypad 0*2 Num Lock ON: Keypad . Num Lock OFF: Del Num Lock ON & OFF: Keypad / Num Lock ON & OFF: Keypad * Num Lock ON & OFF: Keypad ‐ Num Lock ON & OFF: Keypad + Keyboard Enter Keyboard Back Space Keyboard Tab 7.
