MSDS

Page:7/7
Version:
Report
version.Re
port
version
Date of issue/Date of revision:
Validity date***.
Date of previous issue:
00/00/0000
Korea inventory: Not determined.
New Zealand Inventory of Chemicals (NZIoC): Not determined.
Philippines inventory (PICCS): Not determined.
16.Other information
Hazardous Material Information System (U.S.A.) :
Health
1
Flammability
0
Physical hazards
0
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR
1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented
HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA).
HMIS® materials may be purchased exclusively from J. J. Keller (800) 327-6868.
The customer is responsible for determining the PPE code for this material.
National Fire Protection Association (U.S.A.)
:
Flammability
Health
Instability/Reactivity
Special
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material
is not the complete and official position of the National Fire Protection Association, on the referenced subject
which is represented only by the standard in its entirety.
Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended
to be interpreted and applied only by properly trained individuals to identify fire, health and reactivity
hazards of chemicals. The user is referred to certain limited number of chemicals with recommended
classifications in NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals
are classified by NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk.
Date of printing :
Print date
Date of issue
:
Validity date***.
Version
:
Report version.Report version
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-
named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness
of the information contained herein. Final determination of suitability of any material is the sole
responsibility of the user. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that
exist.
0
0
0