SDS

ORTHO GROUNDCLEAR WEED & GRASS
KILLER SUPER CONCENTRATE
Page:6/11
Version: 1.0 Date of issue/Date of revision: 07/26/2019 Date of previous issue: 00/00/0000
Environmental exposure controls :
Emissions from ventilation or work process equipment should be
checked to ensure they comply with the requirements of
environmental protection legislation. In some cases, fume scrubbers,
filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures :
Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the end
of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Contaminated work
clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations
and safety showers are close to the workstation location.
Eye/face protection :
Protective eyewear is not required, but may be used in situations were
contact is expected.
Skin protection
Hand protection :
Chemical-resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical products
if a risk assessment indicates this is necessary. Considering the
parameters specified by the glove manufacturer, check during use that
the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be
different for different glove manufacturers. In the case of mixtures,
consisting of several substances, the protection time of the gloves
cannot be accurately estimated.
Body protection :
No special protective clothing is required.
Other skin protection :
Appropriate footwear and any additional skin protection measures
should be selected based on the task being performed and the risks
involved and should be approved by a specialist before handling this
product.
Respiratory protection :
Based on the hazard and potential for exposure, select a respirator that
meets the appropriate standard or certification. Respirators must be
used according to a respiratory protection program to ensure proper
fitting, training, and other important aspects of use.
Section 9. Physical and chemical properties
Appearance
Physical state :
liquid [emulsion]
Color :
Dark brown
Odor :
Characteristic
Odor threshold :
Not available.
pH :
5.4
Melting point :
Not available.
Boiling point :
Not available.
Flash point :
Not available.