Cut Sheet

A reduced jack footprint
Legrand’s high density jacks incorporate patent-pending mechanical and electrical advancements,
providing greater headroom, as well as a new installation mechanism. In addition, the easy
to lace-and-crimp termination maintains cable performance, reduces time to install and offers
a simple hand tool that contributes additional time savings. The HDJ jacks are available in
Category 6a, 6 and 5e with Clarity
®
performance that is visible in the channel. These jacks are
rear loading, utilizing an innovative locking latch for quick and reliable mounting.
High Density Jacks
HDJ Handled Crimping Tool
Features:

Supported by panel and workstation mounting options

Support up to 48 ports in a 1 rack unit (1 RU panel)

Center tuned to Clarity patch cords for optimal channel performance

Quad Reactance
TM
technology in Category 6a jacks for improved performance at
higher frequencies

ETL verified to TIA 568C.2 Category 6a and Category 6 component performance standards

Quick termination and installation time
NOTE: For other colors add one of the following suffixes: -00 black, -36 blue, -42 red, -43 orange,
-44 yellow, -45 green, -88 white
PART NO. DESCRIPTION
OR-HDJ6A Clarity HDJ Category 6a jack, 8-position, T568A/B, fog white
OR-HDJ6 Clarity HDJ Category 6 jack, 8-position, T568A/B, fog white
OR-HDJ5E Clarity HDJ Category 5e jack, 8-position, T568A/B, fog white
PART NO. DESCRIPTION
OR-HDJHCT HDJ handled crimping tool
OR-HDJ6A-42
OR-HDJ6-36
OR-HDJ5E-44
OR-HDJHCT
HDJ Jack performance and ratings:

8-pin connector: FCC part 68, Subpart F and IEC-603-7 compliant

Durability: 1,000 mating cycles

Contact plating material: minimum 50 micro-inches gold over nickel

Current rating: 1.5 A maximum

Gas-tight connection: insulation displacement of 22 to 24 AWG (.64 to .51mm) plastic
insulated solid copper conductors

UL 94V-0, plastic housing, UL 1863

IDC durability: 20 insertions of any combination of wire gauge
The HDJ termination process is simpler. The HDJ handled crimping tool works with the jack’s
easy to lace wiring cap, making the crimp process quick and consistently aligned. This presents
an even greater time savings when terminating cable.