Specification

Description:
Island Tub Drain
®
(Testable Rough-in) for Freestanding Tubs
Features:
• Asymmetric design 18 Gauge Epoxy coated Metal Deck Plate with holes to lock to
Thinset
• Snap off Test Cap
• Mortar/Tile Guard included
• ITD35 features an ABS Body/Tailpiece.
• ITD5135 features a White PVC Body/Tailpiece
• ITD( ) is a Freestanding Tub rough-in (install before tile installation)
• Designed to be installed in an 8” / 10” joist space with 1-1/2” / 2” P-Trap
respectively. Can also be installed in a slab on grade application.
• Supplied with Flanged Brass Tailpiece and ABS or PVC Waste/Overow Adaptor Kit
• NOTE: Island Tub Drain® IS NOT FOR USE with liquid applied or sheet membranes
• NOTE: Island Tub Drain® MUST BE INSTALLED in a dry area with no potential for water contact
Oakville Stamping and Bending Ltd.
2200 Speers Road, Unit C. Oakville, ON. Canada. L6L 2X8.
T. 905.827.0320 or toll free 1.877.314.6040 F. 905.827.6375 or toll free 1.877.827.6040.
All rights reserved. OS&B
®
reserves the right to change product specications and material or discontinue models without notice.
www.osb.ca (Canada) www.osbplumbing.com (USA)
ITD35 / ITD5135
ISLAND TUB DRAIN
®
(ROUGH-IN) - TESTABLE
1
5
8
"
41mm
1
4
"
6mm
7"
178mm
6
1
4
"
157mm
Certification*
*The “cCSAus Meets UPC” mark means the
product conforms to the requirements of the
NPC, UPC, IPC and IRC.
ITDSPEC-0822
Island Tub Drain
®
is Patented in Canada (Patent # 2,813,010) and the United States of America (Patent # 9,551,138).
1
1
2
"
38mm
8"
203mm
Flanged Brass
Tailpiece
1
2
"
14mm
1
7
8
"
48mm
1-1/2" 11-1/2 NPSM
Mortar/Tile Guard
Included
2" DWV
2
5
8
"
68mm
1"
27mm
1-1/2" DWV
ABS or PVC Adaptor Kit
Attaches to ABS or PVC Bath
Wastes and includes Brass Nut and
Poly Washer