Datasheet

ManualsBrandsOSA OPTO ManualsOptoelectronics & DisplaysUV emitter 375 nm 1108 SMD OCU-400 UA375-X-T

Ceramic

OCU-400 UC375

edition 9/17

Page/Seite 1/8

Features:

 size 3,0(L) x 2,0(W) x 1,0(H) mm

 circuit substrate: Al

Ceramics

 encapsulation: Silicone

 devices are ROHS and REACH conform

 lead free solderable, soldering pads: gold

plated

 taped in 8 mm blister tape, cathode to

transporting perforation

 all devices sorted into radiant intensity

classes

 taping: face-up (T)

Merkmale:

 Größe 3,0 x 2,0 x 1,0 mm

 Gehäusematerial: Al

Keramik

 Vergussmaterial: Silicon

 Bauteile sind ROHS und REACH konform

 Bleifrei lötbar, Lötpads sind vergoldet

 Gegurtet in 8mm Blistergurt, Kathode zur

Transportperforation

 Alle Bauteile sind Strahlstärkeklassen sortiert

 Gurtung: face-up (T)

 Typical Electro-Optical Characteristics

Typische Elektrooptische Eigenschaften

Measurement conditions

Messbedingungen

ambient

= 23 °C; t

test

≤ 60ms

Parameter Symbol Condition Min Typ Max Unit

Emitting Color

Farbe

ultraviolet

Forward Voltage

(2)

Flussspannung

= 20 mA 3.6 4.2 V

Peak Wavelength

(2)

Peak Wellenlänge

= 20 mA 375 380 nm

FWHM

(1)

Halbwertsbreite

Δλ

= 20 mA 10 nm

Radiant Intensity

(2)

Strahlstärke

= 20 mA 1.12 2.10 mW/sr

Reverse Current

(3)

Sperrstrom

= 5V n.a. μA

(1)

Typical property, not 100% tested

(2)

100% measured in an automated test system with max 60 ms operation

(3)

LED should never be operated with reverse bias

Summary of content (8 pages)

PAGE 1
Ceramic OCU-400 UC375 Features:  size 3,0(L) x 2,0(W) x 1,0(H) mm  circuit substrate: Al2O3 Ceramics  encapsulation: Silicone  devices are ROHS and REACH conform  lead free solderable, soldering pads: gold plated  taped in 8 mm blister tape, cathode to transporting perforation  all devices sorted into radiant intensity classes  taping: face-up (T) Merkmale:  Größe 3,0 x 2,0 x 1,0 mm  Gehäusematerial: Al2O3 Keramik  Vergussmaterial: Silicon  Bauteile sind ROHS und REACH konform  Bleifrei lötb
PAGE 2
Ceramic OCU-400 UC375  Maximum Ratings Grenzwerte Parameter Forward Current Flussstrom Forward Current, pulsed Flussstrom, gepulst Reverse Voltage (3) Sperrspannung Thermal Resistance Wärmewiderstand Operating Temperatur Betriebstemperatur Storage Temperature Lagertemperatur Symbol tp≤100μs, =1:10 Min Max Unit If, max 20 mA If, pulse 30 mA UR - V Rth 60 K/W Top -40 +85 °C TSt -40 +85 °C Electrostatic discharge classification (MIL-STD-883) Elektrostatische Empfindlichkeit Outlin
PAGE 3
Ceramic OCU-400 UC375  Typical Performace Diagram Typische Kennlinien 1,40 1,20 rel. Intensity [a.u.] Forward Current [mA] 10 1 1,00 0,80 0,60 0,40 0,20 0,00 0,1 2,70 2,90 3,10 3,30 3,50 Forward Voltage [V] 3,70 0 3,90 5 Forward Current vs. Forward Voltage Flussstrom über Flussspannung 10 15 20 Forward Current [mA] 25 30 35 30 35 Intensity vs.
PAGE 4
Ceramic OCU-400 UC375  Soldering Conditions Lötprofile 300 10...20s Temperature [°C] 250 230°C IR reflow soldering profile for lead containing solder 200 170°C 150 120°C 40s max. IR Reflow Lötprozess für bleihaltiges Lot 100 3K/s max. 50 4K/s max 0 50 100 150 Time [s] 200 250 300 300 217°C 3K/s max Temperature [°C] 250°C 245°C 250 200 180°C IR reflow soldering profile for lead free soldering 10...
PAGE 5
Ceramic OCU-400 UC375  Ordering Code For Parts Kodierung der Bestellnummer Series Serie Color Farbe OCU-400 - Encapsulation Verguss ??????? - ? X Type definition, e.g. Typenbezeichnung z.B.  - Packaging Verpackung ? T – taped up – uncolored clear OCU-400 UC375-X-T Tape And Reel Packing Gurt und Spule D 7’’ Copyright © 2017 OSA Opto Light GmbH. All Rights Reserved Parts/reel 2000 www.osa-opto.
PAGE 6
Ceramic OCU-400 UC375 Packing The reel is sealed in special plastic bag with integrate ESD protection including a silica dry-pack. Shelf life for sealed bag 12 month on max. 30°C and 60% Rh. Floor life 12 month for Europe or 6 month for all other countries on max. 30°C and 60% Rh in a dust free environment. Other bags (i.e. MBB, HIC, Vacuum pack, etc.) on request. Verpackung Die Rolle wird zusammen mit einem Trockenmittelbeutel in einem HighshieldAntistatic-Beutel verschweißt.
PAGE 7
Ceramic OCU-400 UC375  Warnings and Handling Instructions Sicherheitshinweise                 UV LEDs emit intense but mainly invisible ultraviolet radiation when in operation, which may be harmful to eyes, even for brief periods.
PAGE 8
Ceramic OCU-400 UC375 Attention please The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Due to technical requirements components may contain dangerous substances. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer.