Contents Before Use Safety Precautions 1-2 Chair Components e 34 Chair Installation ..o 57 Preparation before e 89 How to Use Controller i 10 Programs and 11-17 Q&A / Important Troubleshooting 18 Care and Storage s 19 Grounding Instructions. s 20 Chair Specification 21 Thank you for purchasing the OS 4500LS Massage Chair. Before using your massage chair, pleads read the contents of this instruction manual and refer to it when needed.
Safety Precautions When using the massage chair, basic precautions should always be followed to reduce the risk of electric shock, burns, fire or injury to persons. Please read the following precautions before using the massage chair. * Make sure the power plug is securely inserted into a proper electrical outset to reduce the risk of short-circuit and fire. » Iris highly recommended that a surge protector is used to prevent from damage.
Safety Precautions » Please consult your doctor if you are in doubt as to whether or not you should use this massage chair. ® Please consult a doctor before using the massage chair if you are pregnant, undergoing any medical treatment, using a medical electronic device such as a pacemaker, or are experiencing any of the following: Malignant tumor, heart disease, back pain, abnormal or curved back bone, osteoporosis or acute illness.
Chair Installation 1. Take out the main unit and accessories from two boxes.
Chair Installation 3. Align the connecting holes from the footrest and seat part. Insert bolt A and secure with split pin as demonstrated.
Chair Installation 4. Lift the leg rest to a horizontal position and align the connecting hole. Insert bolt B and secure with split pin as demonstrated. 5. Attach the seat cover and footrest cover with the zipper.
Preparation before Use 1. Placing the char Ensure sufficient spaces around massage chair, please leave 4.7” of spaces behind the backrest and 7.1” of spaces at the front of massage chair. tattle 47" atlas 7.1 2.Moving the chair Lift up the footrest then recline the chair to approximate 45°to easily move the chair around the house with a slight pull or push A Caution 1. Before moving the chair, please adjust the leg rest back into the original position. 2.
Preparation before Use 3. Placing the cushion pad Note: The back pad is installed with an additional pad to soften the massage. If you desire a stronger massage simply remove the extra pad and proceed to Zippering the pad to the top of the backrest. 4, Adjusting the shoulder Push the shoulder to select between 3 levels of width. 5. Switching the power on (@ Connect the wire plug . @ Connect to the power supply. @ Turn the switch to “I” position.
Programs and Operation Controller (More desalt, SASE refer to the page number after the programs.) 1. Power (P14} 2. Timer (P14) 1 3 3. Pause (P14) 2 4. Deep Tissue (P14} 5. Stretch (P14) 6. Energy (P14) 7. Relax (P15) 8. Full Air (P15} 9. Manual Air (P15} 10-11. Width (P15) 12-13. Position (P15} 14, Vibration (P15} 15. Heat (P16) 5 6 16. Spot/Partial (P16} 4 17. Intensity (P16} 8 18. Speed (P18} 12 14 19. Zero Gravity (P16} 15 1 20. Roller (P16) ]g 13 21.
Programs and Operation Automatic massage programs The 0S-4500LS features 5 automatic massage program to help you enjoy the benefits of a relaxing and invigorating massage. Pres the [(1] bunion fo switch on. The char will 1 recline o ready position. {Randy position: Leq rest Wi raids slight and backrest Wil recline sight} Bale ct any of the 5 automatic massage programs DEEP TISSUE, STRETCH, ENERGY.
Programs and Operation Manual massage programs Press the [(h] annuitant to switch on. The char wil 3 reciting into ready position. {Ready position: | eq rise wil raise sightly and backrest will recline slightly ) Press the [x=7] button o recline to zeros gravity 2 position or [, ] [Fp] bunion to your desired position.
Programs and Operation Manual massage mode Action Snead Insanity Width sp Timer stun Al S O Kepis shays Rolling @& o .mu o o Combination of manual massage Action Aleutian Heat vibration Roller Manual Air Tpe 281 O o shes Rowling fi& o Stopping a massage session Press the [ () ] button to stop the massage functions. The rollers will move back to the storage position and all airbags will deflate, ending the massage. Pausing a massage session To pause a massage, press the [ 11] button on the controller.
Programs and Operation Programs Description 1.Power « Starts and stops all functions of the massage chair. « Press once. Remote control will light up and chair will be in die mode. « You can press any massage function buttons to begin your massage session, at a default time of 15 minutes. « Press again, all functions will stop and massages rollers will return to original position. 2.Timer « Controls the duration of the massage session. « The default time for all massages functions is 15 minutes.
Programs and Operation 7 Relax * Engages the full body relax auto program. « This program will start with slow kneading and heavy tapping massage, progressing to in-depth massage targeting the neck and lower back. 8.Full Air « Engages the the full body air pressure auto program. « This program applies full body air pressure massage to shoulder, arm, palm, lower back, buttocks, thighs, calves and feet.
Programs and Operation 15. Heat *» Heat function is set to OFF by default. « Press this button once o activate the waist heating function. Press the button again to stop the waist heating function. « It is applicable during any Automatic Program, Localized Area Program or Manual Program. 16. Sportswear (S/P) « Press once to localize the massage to a particular point. « Press again to shift massage to a particular area of body. « This will esp the original massage node working on a range of 8cm.
Programs and Operation 23/24. Recline / Incline « Control the recline / incline angle of the chair. « Press once and the backrest will move to a horizontal reclining position or an upright sitting position. Press again to stop at your preferred angle. 25. Kneading * Press this button once to activate the kneading function for a full back massage. Press again to stop the kneading function. « Kneading function strength can be adjusted by pressing “Speed” button after activating kneading function.
Troubleshooting This page summarizes the most comment problems you could encounter with the product. If you are unable to solve the problem with the information below, contact service center immediately. If the problem encounters is not listed, please try the following suggestions: 1. Tum off the product and unplug it. 2. Wait for 60 minutes. 3. Plug the product back to the recommended outlet and restart. 4. If the problem persists, contact the authorized service center.
Care and Storage 1.Cleaning Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. When wiping down the chair use non toxic cleaners and be sure the cloth is moist and NOT wet. Do not immerse to appliance in water. @ Remove the main plug from the wall socket. @ Clean the control pans and cords with a dry cloth. @ Do not use a moist cloth or a cleaning agent. 2. Storing @ Disconnect the product from the power source after use.
Grounding Instructions This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Chair Specifications Dimensions(L Model No. 08 4500LS Rated Voltage 110v~120v Rated Frequency 50/60Hz Rated Power Consumption 180W Timer 5/10/15/20/25/30 minutes Max Time Rate 30 minutes 2" Carton 1 : Carton 2 : Gross Weight: 271.7 Ibs Weight Net Weight: 226.6 Ibs Controller wire: 58.0" Length of Wire Power supply wire: 70.
