Manual

Section 2 How WiPry Works
2.23 Identify Interference Source
This screenshot was captured during speed test on an HP laptop. Not only were wireless
speeds affected on the laptop but it was also causing problems for every other wireless
device. Powering down the laptop fixed the problem for all devices. It was
recommended that the customer disable HP wireless network card and directly connect
the laptop using an Ethernet cable. No actions are required to duplicate the setup. This
is the default view with heat map.
HP Laptop – Bandwidth Speed Test (This is a problem!)
Normal bandwidth speed test
It’s easy to reset the software back to the default view. Just tap the ‘settings’
menu option. Then, tap . . Super-savvy
techs may also want to save their favorite setup(s). Just below the reset
config option is an option to save three different setups. After a setup has
been saved, just tap and the screen will load.
8