Manual

Please contact OSD AUDIO HOME PRODUCT
AT [phone]
MI5 Powered Amplifier Specifications
Power Bandwidth 20Hz-20kHz:
80W per CH into 8 ohm loads with less than 0.2% THD+N
125W per CH into 4 ohm loads with less than 0.2% THD+N
250W Bridged Mono into 8 ohms with less than 0.2% THD+N
Crosstalk:>65dB@1kHz, ref. To rated power into 8 ohms
Frequency Response: (20Hz to 20kHz)+0.0dB, -0.5dB
Signal to Noise ratio:-103dB ref. To rated power into 4 ohms
AC Power Consumption: 1200W (all channels driven)
Net Weight: 24.3 lbs (11.0 kgs)
Gross Weight: 32.2 lbs (14.6 kgs)
AC Mains Fuse:
115V~60Hz T10AL,250V
230V~50Hz T5AL,250V
Limited Warranty
OSD AUDIO: Warrants its amplifier products against defects in
materials and workman-ship for a limited period of time. For a period
of two years from date of original purchase, we will repair or replace
the product, at out option, without charge for parts and labor.
Customer must pay all parts and labor charges for factory refurbished
product expires after ninety (90) days from date of original purchase.
Whenever you are using loudspeakers outdoors, you should be
Aware that sound does not travel like it would in your home.
Without the reflective surfaces of walls and ceilings, sound outdoors
will dissipate quickly. Therefore, in an outdoor situation the MI6
Powered Amplifier provides the opportunity to bridge adjacent
channels, effectively doubling the available power for your speakers,
This can help to overcome the problem of using speakers outdoors
assuming the speakers chosen are capable of handling the additional
power.
It should be noted that the MI6 Powered Amplifier is rated to
operate into minimum 8-ohm bridged load. Therefore, if you
are using more than single 8-ohm loudspeaker in bridged mode you
should consider using an impedance matching speaker selector,
such as the SVCC-6 or possibly using an impedance matching
volume control, such as the SVC-300, VKR-120 or VMS-300 in a
weatherproof housing available at your favorite DIY store or electri-
cal supply. The choice of a volume control would allow you the
additional flexibility of being able to attenuate the volume whenever
necessary.
Applications
Powering Speaker Outdoors
This warranty will become void if the serial number identification has
been wholly or partially removed, altered or erased. Repair or replace-
ment under the terms of this warranty does not extend the terms of this
warranty. Should a product prove to be defective in workmanship or
material, the consumer’s sole remedies will be repair or replacements as
provided under the terms of this warranty. Under no circumstances shall
OSD be liable for loss or damage, direct, consequential or incidental,
arising out of the use of or inability to use the product. There are no
express warranties other than described above
Consumers are required to provide a copy of the original sales invoice
from an authorized OSD dealer when making a claim against this limited
warranty. This limited warranty only covers failures due to defects in
materials or workmanship that occur during normal use. It does not cover
failures resulting from accident, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, modification, service by
anyone other than OSD or damage that is attributable to acts of god. It
does not cover costs of transportation to OSD or damage in transit. The
customer should return their defective product, freight prepaid and
insured, to OSD AUDIO. Only after receiving a Return Authorization.
This limited warranty applies only to purchases from authorized OSD
Electronics retailers. This limited warranty is extended only to the original
purchaser.
5