MX-1260 Multi Zone Amplifier OWNER’S MANUAL ZONE
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.
General Information and Features Speaker Phasing Front Panel To obtain proper phasing and correct bass response, it is necessary for all channels be in correct phase. The correct phasing occurs when speakers move in and out in unison (in phase) on mono audio. Speakers connected in phase ensure proper imaging while an out-of-phase connection causes indistinct imaging. Identify the positive (+) and negative (-) polarity on the speaker cable being used and the corresponding connections on the speakers.
MX 1260 Connect the right or left output from the audio source to the right or left input of the zone you are bridging. Repeat this for each zone you want in bridged mode. the return. This unit should not be shipped back to OSD Audio without the RA#. DO NOT attempt to open or dismantle this amplifier. THIS WILL VOID THE WARRANTY! The “BR/ST” switch should be in the bridged (BR) position. Make sure the switch is in this mode only on the zones you want bridged.
MX1260 Multi Zone Amplifier Conforms to UL Std 6500 Certified to CAN/CSA Std C22.2 No. 1 Tested to Comply with FCC Standards HOME OR OFFICE Limited Warranty cover costs of transportation to OSD Audio or damage in transmit.The OSD Audio warrants its audio products against defects in material customer should return his defective product,freight prepaid and insured,to and workmanship for a limited period of time.For a period of two years from OSD Audio only after receiving a Return Authorization.