Owner's Manual
Table Of Contents
- User Manual
- Warning
- Features
- Specs
- Optional Keypad (Sold Separately)
- Remote Control (Included with Kit)
- Connect & Operate
- Connecting the Sources
- Connecting the Speakers
- Using the Pre-amp Outfits
- Connecting the Optional Keypads
- Connecting & Useing the Zone Status Ports
- IR Emitters
- Cascading Sources into Additional Zones
- Configuring Wireless Control Via APP
- Ethernet/Wi-Fi Connection
- Using the Control APP
- Warranty
- Product Info
MAX12
MAX12/KIT
RS232 Commands and Protocol
Command Mode:
Control structure to send a command is:
<xxPPyy/
Reply from command is:
>xxPPyy/
< = prefix at the beginning of each action command
Xx = Control ID Code (see table below)
PP = Type of command being sent
Yy = Action command
/ = Carriage Return
Example: <11CH01/ sets Zone 1 to Source 1 on the Master Unit
ID Code:
Master
41
2nd Unit
42
3rd Unit
43
Zone 1
11
Zone 7
21
Zone 13
31
Zone 2
12
Zone 8
22
Zone 14
32
Zone 3
13
Zone 9
23
Zone 15
33
Zone 4
14
Zone 10
24
Zone 16
34
Zone 5
15
Zone 11
25
Zone 17
35
Baud Rate 9600
Data Bit 8
Stop Bit 1
Parity None