NERO WSA USERS GUIDE • • • • (1) (1) (1) (1) WSA RX Receiver WSA TX Transmitter 5.9V DC Adapter Mounting Bracket ® ® 5.
USERS GUIDE Each WSA TX & WSA RX comes with an included bracket for mounting to a subwoofer, flat surface or other applicacations. Follow these steps to install a receiver to the back of a subwoofer. WSA RX bracket Attach the WSA RX to the bracket with a firm press. The unit will snap into place. Use an RCA cable and the provided power cable to complete the install.
USERS GUIDE
USERS GUIDE For Pairing With The WSA TX: 1. On the WSA RX receiver, connect the Sub Out output to the LFE/Mono input on the sub amplifier. 2. On the WSA TX transmitter, connect an audio source to the Audio In RCA jack. For LFE/mono signals use the L channel of the RCA jack. 3. Plug in the power supplies to the wall outlet, but wait to apply power. 4. On the WSA RX receiver, power the device by applying the 5.9V DC in. 5. Press the Pair button on the WSA RX. 6.
USERS GUIDE
USERS GUIDE 5725-5850MHz WARRANTY All OSD AUDIO electronics have (2) year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period OSD AUDIO will replace any defective part and correct any defect in workmanship without charge for either parts or labor. OSD AUDIO may replace returned electronics with a product of equal value and performance.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.
