NERO XA5 HOME THEATER AMPLIFIER OWNER’S MANUAL NERO XA5 9-22-22 man.
IMPORTANT SAFETY PRECAUTIONS This manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit, please make sure that the buyer also receives this manual. • Use only an approved power cable and plug or distribution board to connect your amplifier to a power outlet. Do not use an extension cable.
REAR PANEL SPEAKER & INPUT CONNECTIONS B C A INPUTS: Non Balanced RCA Balanced XLR OUTPUTS: Connect to Speakers Connecting your speakers: D E F A. Audio Inputs (see page 4) Inputs for connecting the XA Amplifier to the outputs of an AVR, pre-pro, or other devices. D. Speaker Outputs (see page 4) 5-way binding posts used to connect the XA Amp to your speakers. B. Remote Trigger Input (see page 5) Power On/Off using 8-24v signal from connected device, such as AVR, control system or processor. E.
AMPLIFIER OPERATION AND MAINTENANCE Before you begin: Ensure that the amp is plugged into a 15 Amp power socket. At full power the amp will require in excess of 10 Amps. Ensure the amp has air clearance with nothing covering the ventilation slots. 6 inches of clearance is recommended, or, if rack mounted, please use a cooling fan. Double-check all connections from connected processors or AVR ’s, and connections to speakers.
WARRANTY OSD Audio electronics have (2) year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period OSD Audio will replace any defective part and correct any defect in workmanship without charge for either parts or labor. OSD Audio may replace returned electronics with a product of equal value and performance. In such cases, some modifications to the mounting may be necessary and are not OSD Audio ’s responsibility.