Owner's Manual

SECTION 2: CONTROLS AND CONNECTIONS
22) Single-Zone Constant Impedance Outputs
a. This amplier comes complete with both constant voltage and constant impedance outputs.
Only one type of output may be used at a time. Attempting to use both simultaneously
could damage the amplier and/or speakers and would void the warranty.
b. This amplier oers single-channel 4 Ohms and 8 Ohms outputs.
23) XLR Line Output:
a. Utilize this XLR output to connect the amplier to a booster amplier with a matching input.
24) RCA Line Output:
a. Utilize this RCA output to connect the amplier to another amplier with RCA inputs to daisy
chain ampliers.
25) Auxiliary Inputs:
a. These inputs accept right and left channel RCA inputs.
26) Phantom Power Switch:
a. This amplier provides phantom power to the appropriate microphones.
b. This switch will turn the phantom power feature on and o for each microphone input.
27) Microphone Inputs:
a. This amplier has three XLR microphone inputs.
b. To expand the number of microphone inputs on this amp, we suggest using an external mi
crophone mixer.
28) Priority Paging Switch
a. Activation of this switch will allow any microphone connected to MIC1 to take priority.
b. This means that when a page is made from a microphone connected to this input, all
other audio sources will be temporarily muted.
8