User Manual
12 13 14 15 16 17 18
28
27
26
2524
2322
21
20
19
SECTION 2: CONTROLS AND CONNECTIONS
REAR PANEL
12) Main Power Switch:
a. This switch will completely turn the amplier power on and o.
13) Commercial Speaker Zone Outputs:
a. This amplier comes complete with both constant voltage and constant impedance
outputs. Only one type of output may be used at a time. Attempting to use both
simultaneously could damage the amplier and/or speakers and would void the warranty.
b. 5 outputs are provided to make speaker wiring easier and to allow for distribution of
speakers into groups.
c. In conjunction with the buttons on the front panel (#2), audio can be turned on and o to
these zones.
VERY IMPORTANT: Make sure commercial audio principles are followed and the proper
speaker types are wired to the proper outputs. Putting the incorrect
speakers on the incorrect output can damage your speakers
and/or amplier and is not covered under warranty.
If unsure, please contact a professional.
6