User Manual
SECTION 2: CONTROLS AND CONNECTIONS
22) Single-Zone Constant Impedance Outputs
a. This amplier comes complete with both constant voltage and constant impedance outputs.
Only one type of output may be used at a time. Attempting to use both simultaneously
could damage the amplier and/or speakers and would void the warranty.
b. This amplier oers single-channel 4 Ohms and 8 Ohms outputs.
23) XLR Line Output:
a. Utilize this XLR output to connect the amplier to a booster amplier with a matching input.
24) RCA Line Output:
a. Utilize this RCA output to connect the amplier to another amplier with RCA inputs to daisy
chain ampliers.
25) Auxiliary Inputs:
a. These inputs accept right and left channel RCA inputs.
26) Phantom Power Switch:
a. This amplier provides phantom power to the appropriate microphones.
b. This switch will turn the phantom power feature on and o for each microphone input.
27) Microphone Inputs:
a. This amplier has three XLR microphone inputs.
b. To expand the number of microphone inputs on this amp, we suggest using an external mi
crophone mixer.
28) Priority Paging Switch
a. Activation of this switch will allow any microphone connected to MIC1 to take priority.
b. This means that when a page is made from a microphone connected to this input, all
other audio sources will be temporarily muted.
8