Owner's Manual

New SSVC2V7; 2 Zone, 70V Mono Speaker Selector with Built in 100W
70V Mono Volume Control x 2 and Straight Pass Thru Output
Zone 1
On/Off
Switch
Specifications
• Power Handling: 100 Watts Per Channel/Zone Mono Single Channel
• Frequency Response: 20Hz-22KHz (+0 dB, -0 dB)
• Selector Type: Noise-Free, front access On/Off Pushbutton and Rotary Knob
• Steps: 33 dB, 10 steps plus full of (step 11)f
• Connection Type: Removable Input/output Connectors
• Wire Size Acceptance: 16 Gauge 2 Conductor,
• Amplifier Protection: 70V Mono only No Impedance Protection Needed
Front Panel SSVC2V7
The SSVC2V7 is a unique 70V Speaker Selector featuring…
2 independent Zones each controlled by a 100Watt 70V Mono Volume Control featuring a Rotary style
Knob. Each zone has On/Off switch as well. The unit has a single 2 conductor input and direct pass thru
allowing to stack additional SSVC27V Speaker selectors only limited by your application. Standard 70V
rules apply to the number of speakers used per zone, matching the available power from the 70V
amplifier
Zone 1
On/Off
Switch
Zone 2
Volume
Knob
Note #2: The Thru output comes
directly from the Input, it does not
go through the transformer allowing
you to stack multiple SSVC7V.
Note #1: The On/Off switch is supply so
you can turn off each zone completely
not just depend on the Volume Control
to turn so the sound down to inaudible
levels. The knob would need to be
turned all the way counterclockwise for
full off
Input
from Amplifier
Straight Thru
Output
ZONE 1 Speaker
Output
ZONE 1 Speaker
Output
Back Panel SSVC2V7
Zone 1
Volume
Knob