TDS

ManualsBrandsOSI ManualsPaint10 fl. oz. Gray No.517 QUAD Advanced Formula Window Door and Siding Sealant

OSI® QUAD®

Window, Door & Siding Sealant

Page 1 of 5

Revision: August 14, 2018

Supersedes: November 14, 2012

Ref. #: 445275

OSI® QUAD® Window, Door & Siding Sealant is an all-season formula designed for use on exterior

window, door and siding applications in residential and low-rise building construction. Unlike most other

sealants, it resists dirt & dust collection, yellowing and water washout. OSI QUAD requires no tooling and

once cured is paintable with latex paints. OSI QUAD is composed of elastomeric polymers and high quality

synthetic resins. This product offers the superior adhesion characteristics and elasticity found in high

performance sealants. It yields a tough, rubbery seal which resists outdoor weather-related elements. It

goes on smoothly and has easy cut-off without stringing.

Available As:

Item #

Size

Color

1642878

10.0 fl oz (295 ml) cartridge

White (001) – 4.0% VOC

OSI QUAD is used to seal around exterior windows and doors, fiber-cement and vinyl siding, PVC trim, and gutters in residential and low-rise

building construction. Sealant bonds without a primer to most common substrates like cedar, painted or stained woods, fiberglass, vinyl, coated

aluminum, steel, metal, brick, masonry and concrete.

• Do not use for sealing expansion joints, including butt joints

• Do not use on joints immersed in water or applications requiring continuous water immersion

• Do not use as a traffic bearing sealant or on log homes

• Not compatible with polystyrene foams and polypropylene or polyethylene plastics

• Not compatible with bitumen-based products such as flashing tapes. Damage or color bleed through may occur

• Should not be used in applications less than ¼” in depth or ¼” wide in order to maintain the integrity of the sealant

• For joints deeper than 3/8” (9.5 mm), a backing material should be used

• Tooling of the sealant is not necessary or recommended

• DO NOT TOOL, smear or feather on prefinished colored claddings (i.e. siding, trim) as this will reduce any sealants ability to withstand

UV exposure and joint movement, causing premature joint failure and color fading.

• DO NOT use as a nail hole filler or in touch-up applications. Follow prefinished cladding manufacturer’s instructions for nail hole filling

For a 10 fl. oz. (295 ml) cartridge:

▪ A 1/4” (6 mm) bead extrudes approximately 30.6 ft. (9.3 m)

▪ A 3/8” (9.5 mm) bead extrudes approximately 13.6 ft. (4.1 m)

• All-Weather Application, 20°F-100°F

• Permanently Flexible: ± 25% Joint Movement Capability

• UV and Water Resistant – will not crack or yellow

• Resists Dust & Dirt Collection

• Paintable when cured*

*Cure time is dependent on temperature, humidity and depth of sealant applied

FEATURES & BENEFITS:

COVERAGE

RECOMMENDED FOR:

LIMITATIONS:

DESCRIPTION:

Summary of content (5 pages)

PAGE 1
Revision: August 14, 2018 Supersedes: November 14, 2012 Ref. #: 445275 DESCRIPTION: OSI® QUAD® Window, Door & Siding Sealant is an all-season formula designed for use on exterior window, door and siding applications in residential and low-rise building construction. Unlike most other sealants, it resists dirt & dust collection, yellowing and water washout. OSI QUAD requires no tooling and once cured is paintable with latex paints.
PAGE 2
Revision: August 14, 2018 Supersedes: November 14, 2012 Ref. #: 445275 TECHNICAL DATA Typical Uncured Physical Properties: White VOC Content: <4.0% by weight CARB Appearance: Non-slumping paste White only 217 g/l SCAQMD rule 1168 Base: Elastomeric polymers and synthetic resins Odor: Solvent Shelf Life: 24 months from date of manufacture (unopened) Specific Gravity: 1.30 Flashpoint: Product is a solid. Burn Rate: <2.
PAGE 3
Revision: August 14, 2018 Supersedes: November 14, 2012 Ref. #: 445275 DIRECTIONS Masonry: Concrete, stone, stucco and other masonry must be cleaned where necessary by grinding or wire brushing to expose a sound surface free of contamination and laitance. Concrete must be fully cured and free of release agents. Wood and painted wood: New and weathered wood must be clean and structurally sound. Cut back weathered surfaces and dry rot until clean, sound wood is reached. Scrape away paint to bare wood.
PAGE 4
Revision: August 14, 2018 Supersedes: November 14, 2012 Ref. #: 445275 DIRECTIONS Application: Insert cartridge into caulking gun, apply moderate pressure in order to break the Break-A-Way Seal™ inside the nozzle. Cut the tip off the cartridge at a 45° angle to desired bead size (3/8” size bead is recommended). Apply sealant between 20°F (-7°C) and 100°F (38°C). Apply sealant with steady pressure, forcing the sealant into the joint making sure the sealant "wets" the side surfaces of the joint.
PAGE 5
Revision: August 14, 2018 Supersedes: November 14, 2012 Ref. #: 445275 LABEL PRECAUTIONS WARNING! HARMFUL IF INHALED OR SWALLOWED. MAY CAUSE EYE, SKIN AND RESPIRATORY IRRITATION. WARNING! Contains petroleum distillates, xylene and crystalline silica. Use in a well-ventilated area. Prevent build-up of vapors by opening all windows and doors to achieve cross ventilation. Avoid breathing vapors. Avoid contact with eyes and skin.