SDS

IDH number: 1637324
Product name: OSI Quad Window, Door, and Siding VOC Advanced Formula Sealant
Page 2 of 7
Hazardous Component(s)
CAS Number
Percentage*
Limestone
1317-65-3
30 - 60
Hydrocarbon resin
Proprietary
10 - 30
4-Chloro-.alpha.,.alpha.,.alpha.-
trifluorotoluene
98-56-6
10 - 30
Aliphatic hydrocarbon
Proprietary
10 - 30
Silica, amorphous, fumed, crystal-free
112945-52-5
1 - 5
Xylenes
1330-20-7
1 - 5
Ethylbenzene
100-41-4
0.1 - 1
Quartz (SiO2)
14808-60-7
0.1 - 1
* Exact percentage is a trade secret. Concentration range is provided to assist users in providing appropriate protections.
4. FIRST AID MEASURES
Inhalation:
If inhaled, immediately remove the affected person to fresh air. If breathing is
difficult, give oxygen. If symptoms develop and persist, get medical attention.
Skin contact:
Immediately wash skin thoroughly with soap and water. If symptoms develop
and persist, get medical attention.
Eye contact:
In case of contact with the eyes, rinse immediately with plenty of water for 15
minutes, and seek immediate medical attention.
Ingestion:
Do not induce vomiting, seek medical advice immediately.
Symptoms:
See Section 11.
Notes to physician:
Treat symptomatically and supportively.
5. FIRE FIGHTING MEASURES
Extinguishing media:
Water spray (fog), foam, dry chemical or carbon dioxide.
Special firefighting procedures:
Wear a self-contained breathing apparatus with a full face piece operated in
pressure-demand or other positive pressure mode. Wear full protective
clothing.
Unusual fire or explosion hazards:
Closed containers may explode when exposed to extreme heat. Fumes and
vapors from thermal decompositions vary in composition and toxicity.
Hazardous combustion products:
Upon decomposition, this product emits carbon monoxide, carbon dioxide
and/or low molecular weight hydrocarbons.
6. ACCIDENTAL RELEASE MEASURES
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected
personnel.
Environmental precautions:
Ventilate area. Wear appropriate protective equipment and clothing during
clean-up. Prevent further leakage or spillage if safe to do so. Do not allow
product to enter sewer or waterways.
Clean-up methods:
Scrape up spilled material and place in a closed container for disposal.
Dispose of according to Federal, State and local governmental regulations.