Instructions / Assembly

©Henkel Corporation 2018/51891
SIDE VIEW SIDE VIEW
TOP VIEW
1. Remove cap covering the valve.
2. Connect the straw to the can by inserting the tab end into the hole in
the can’s threaded adapter and turn 90 degrees.
3. Slowly, but firmly push the trigger into the can’s valve. A slight click
indicates proper connection. CAUTION: pushing too hard to connect
can cause foam to dispense.
4. With the valve end of the can down, squeeze trigger to dispense foam.
Adjust bead size by applying pressure to the trigger. Seal perimeter
around window or door rough opening. Fill gap approximately 30%.
5. If not in use for more than 5 min, remove straw and clean with OSI
Foam Cleaner or acetone to avoid hardening in the straw.
For cleaning, the straw can be clicked onto the Foam Cleaner valve.
UPGRADED TRIGGER DESIGN
How to Attach Straw to Can
Visit OSITOUGH.COM for complete technical data sheets