Instructions / Assembly

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.ofﬁcestar.net or call or write us.

ASHCSL

August, 2019

ASHLAND CONSOLE TABLE

PAGE 1
August, 2019 ASHCSL ASHLAND CONSOLE TABLE Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
PAGE 2
1. Do not use this product unless all screws and bolts are securely tightened. 2. Check that all screws and bolts are tight every three months or as needed. 3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation. 4. Do not use this product as a stepladder. 5. Use this product for its intended purpose only. 6. FOR INDOOR RESIDENTIAL USE ONLY.
PAGE 3
PARTS (A) Top (1 PC) (B) Left Leg (2 PCS) (C) Right Leg (2 PCS) (D) Shelf (1 PC) (E) Bottom Panel (1 PC) HARDWARE LIST NO DRAWING DESCRIPTION SIZE QUANTITY 1 Bolt 1/4” x 12mm 8 PCS 2 Bolt 1/4” x 40mm 12 PCS 3 Flat Washer 1/4” x 16mm 20 PCS 4 Lock Washer 1/4” 20 PCS 5 Angled Bracket N/A 4 PCS 6 Allen Wrench 4mm 1 PC
PAGE 4
STEP 1 (6) (1) (4) (3) (D) (5) DO NOT FULLY TIGHTEN BOLTS (1). STEP 2 (C) (B) (C) (B) (6) (2) (4) (3) (A) DO NOT FULLY TIGHTEN BOLTS (2).
PAGE 5
STEP 3 (B) (C) (C) (B) (3) (4) (1) (6) DO NOT FULLY TIGHTEN BOLTS (1). STEP 4 (E) (6) (2) (4) (3) FULLY TIGHTEN ALL BOLTS.