User Manual

ACE SERIES

FEATURE DETAILS

REMOVABLE FLOATING TOP LID

75L / 50L

The ﬂ oating top lid can extend to accept oversized loads or can be removed from

the pack body. The top lid is attached to the pack body using a three-point vector

strap system for easy adjustment with variable loads. Unthread the side ladder

buckle and slide the strap through the sewn-in slider buckles on the backpanel. To

reattach, reverse this process.

INTERNAL COMPRESSION STRAP

75L / 50L

Once your pack is loaded, clip and tighten the red

internal compression strap to stabilize the load.

ICE TOOL/FISHING ROD LOOP

75L / 50L

The single gear loop located at the base of the front panel of the pack is provided

for ﬁ shing rod or ice tool carry and works in conjunction with your own rigging to

provide stable, secure carry.

STOW-ON-THE-GO™ TREKKING POLE ATTACHMENT

75L / 50L

Osprey's Stow-on the-Go™ trekking pole attachment is designed to

quickly attach and carry trekking poles while wearing a pack.

A Adjust the trekking poles to their minimum length.

B Locate the elasticized loop on the lower left side of pack. While

pulling the loop out from the pack, insert the basket end of the

trekking poles into the loop.

C On the left harness strap locate the trekking pole icon. Pull up on the

cord to open, place pole handles in the loop and tighten with the cord

lock to secure.

D Reverse these steps to remove the trekking poles.

DAYLITE PACK / ALPINE POCKET ATTACHMENT

75L

There are four cord loops on the front of the pack for attaching an Osprey

Daylite pack or Alpine Pocket.

A Locate the four sliders on the upper and lower straps of the Daylite.

B Align the sliders with the four cord loops on the larger pack.

C Push each slider through the cord loop.

D Tighten the straps to secure.