Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhotodiode 880 nm 150 mW DIL

BPW 34 FA

Version 1.5 | 2018-06-14

Produktdatenblatt | Version 1.1

www.osram-os.com

BPW 34 FA

DIL

Silicon PIN Photodiode with Daylight Filter

Applications

— Electronic Equipment — Industrial Automation (Machine controls, Light

barriers, Vision controls)

Features:

— Package: black epoxy

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Especially suitable for applications from 730 nm to 1100 nm

— Short switching time (typ. 20 ns)

— DIL plastic package with high packing density

Ordering Information

Type Photocurrent Photocurrent Ordering Code

typ.

= 1 mW/cm²;

= 870 nm; V

= 5 V E

= 1 mW/cm²;

= 870 nm; V

= 5 V

BPW 34 FA ≥ 40 µA 50 µA Q62702P1129

Summary of content (12 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 BPW 34 FA BPW 34 FA DIL Silicon PIN Photodiode with Daylight Filter Applications ——Electronic Equipment ——Industrial Automation (Machine controls, Light barriers, Vision controls) Features: ——Package: black epoxy ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Especially suitable for applications from 730 nm to 1100 nm ——Short switching time (typ.
PAGE 2
BPW 34 FA Maximum Ratings TA = 25 °C Parameter Symbol Operating Temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Reverse voltage VR max. 16 V Reverse voltage t ≤ 2 min VR max. 32 V Total power dissipation Ptot max. 150 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
PAGE 3
BPW 34 FA Characteristics TA = 25 °C Parameter Symbol Wavelength of max sensitivity λS max typ. 880 nm Spectral range of sensitivity λ10% typ. 730 ... 1100 nm Radiant sensitive area A typ. 7.02 mm² Dimensions of active chip area LxW typ. 2.65 x 2.65 mm x mm Half angle φ typ. 60 ° Dark current VR = 10 V IR typ. max. Spectral sensitivity of the chip λ = 870 nm Sλ typ. 0.65 A / W Quantum yield of the chip λ = 870 nm η typ. 0.
PAGE 4
BPW 34 FA Relative Spectral Sensitivity 1), 2) Srel = f (λ) OHF01430 100 Srel % 80 70 60 50 40 30 20 10 0 400 Directional Characteristics 600 800 1000 nm 1200 λ 1), 2) Srel = f (φ) 40 50 30 20 10 60 ϕ 0 1.0 0.8 0.6 70 0.4 80 0.2 0 90 1.0 0.8 100 OHF01402 4 Version 1.5 | 2018-06-14 0.6 0.
PAGE 5
BPW 34 FA Photocurrent/Open-Circuit Voltage IP (VR = 5 V) / VO = f (Ee) ΙP 1), 2) Dark Current 1), 2) IR = f (VR) ; E = 0 OHF01428 10 3 µA 10 2 10 4 mV OHF00080 4000 VO ΙR pA 10 3 3000 10 2 2000 10 1 1000 VO 10 1 ΙP 10 0 10 -1 10 0 10 1 10 2 µW/cm 2 10 0 10 4 Ee Capacitance 1), 2) C = f (VR); f = 1 MHz; E = 0; OHF00081 100 C pF 80 70 60 50 40 30 20 10 10 -1 10 0 10 1 0 -2 10 5 Version 1.
PAGE 6
BPW 34 FA Dark Current 2) IR = f (TA); E = 0; VR = 10 V OHF05717 104 IR nA 103 102 101 100 10-1 0 20 40 60 80 ˚C 100 TA Power Consumption Ptot = f (TA); OHF00394 160 mW Ptot 140 120 100 80 60 40 20 0 20 40 60 0 6 Version 1.
PAGE 7
BPW 34 FA Dimensional Drawing 3) Approximate Weight: 78.0 mg Package marking: Cathode 7 Version 1.
PAGE 8
BPW 34 FA TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 8 Version 1.
PAGE 9
BPW 34 FA Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 10
BPW 34 FA Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 11
BPW 34 FA Glossary 1) Testing temperature: TA = 25°C 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ.