Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhototransistor 850nm 50 mA 35 V THT

BPX 82

Version 1.3 | 2018-05-02

Produktdatenblatt | Version 1.1

www.osram-os.com

BPX 82

Array Linear

Silicon NPN Phototransistor Arrays

Applications

— Industrial Automation (Machine controls, Light

barriers, Vision controls)

Features:

— Package: clear epoxy

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Spectral range of sensitivity: (typ) 450 ... 1100 nm

— Multiple-digit array package

— High linearity

— Available in groups

Ordering Information

Type Photocurrent Ordering Code

= 5 V;

= 950 nm; E

= 0.5 mW/cm²

PCE

BPX 82 320 ... 1000 µA Q62702P0021

Only one bin within one packing unit (variation less than 2:1)

Summary of content (12 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 BPX 82 BPX 82 Array Linear Silicon NPN Phototransistor Arrays Applications ——Industrial Automation (Machine controls, Light barriers, Vision controls) Features: ——Package: clear epoxy ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Spectral range of sensitivity: (typ) 450 ... 1100 nm ——Multiple-digit array package ——High linearity ——Available in groups Ordering Information Type BPX 82 Photocurrent VCE = 5 V; λ = 950 nm; Ee = 0.
PAGE 2
BPX 82 Maximum Ratings TA = 25 °C Parameter Symbol Operating temperature Top min. max. -40 °C 80 °C Storage temperature Tstg min. max. -40 °C 80 °C Collector-emitter voltage VCE max. 35 V Collector current IC max. 50 mA Collector surge current τ ≤ 10 µs ICS max. 200 mA Emitter-collector voltage VEC max. 7V Total power dissipation Ptot max. 90 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
PAGE 3
BPX 82 Characteristics TA = 25 °C Parameter Symbol Number of detectors n Dimension “B” (see drawing) l max. min. 4.9 mm 4.5 mm Wavelength of max sensitivity λS max typ. 850 nm Spectral range of sensitivity λ10% typ. 450 ... 1100 nm Chip dimensions LxW typ. 0.55 x 0.55 mm x mm Radiant sensitive area A typ. 0.11 mm² Half angle φ typ. 18 ° Photocurrent VCE = 5 V; Std. Light A; Ev = 1000 lx IPCE typ. 1900 µA Dark current VCE = 20 V; E = 0 ICE0 typ. max.
PAGE 4
BPX 82 Grouping TA = 25 °C Group Photocurrent VCE = 5 V; λ = 950 nm; Ee = 0.5 mW/cm² min. IPCE Photocurrent VCE = 5 V; λ = 950 nm; Ee = 0.5 mW/cm² max. IPCE A 320 µA 630 µA B 400 µA 800 µA C 500 µA 1000 µA For delivery the components are marked -A, -B, -C. Due to differing yields it is not possible to order a definite group. Relative Spectral Sensitivity 2), 3) Srel = f (λ) 100 OHF04048 Srel % 80 70 60 50 40 30 20 10 0 400 500 600 700 800 900 nm 1100 λ 4 Version 1.
PAGE 5
BPX 82 Directional Characteristics 2), 3) Srel = f (φ) Photocurrent Dark Current 2), 3) IPCE = f (Ee) ; VCE = 5 V 2), 3) ICE0 = f (VCE) ; E = 0 ; OHF04049 10 1 nA I CEO 10 0 10 -1 10 -2 0 5 10 15 20 25 30 V 35 VCE 5 Version 1.
PAGE 6
BPX 82 Collector-Emitter Capacitance 2), 3) CCE = f (VCE); f = 1 MHz; E = 0 ; OHF04051 8 pF C CE 7 6 5 4 3 2 1 0 -3 10 10 -2 10 -1 10 0 10 1 V 10 2 VCE Dark Current Photocurrent 2) ICE0 = f (TA); E = 0 IPCE,rel = f (TA); VCE = 5 V OHF04050 10 4 nA I CEO 10 3 10 2 10 1 10 0 10 -1 10 -2 -25 0 2) 25 50 75 ˚C 100 TA 6 Version 1.
PAGE 7
BPX 82 Power Consumption Ptot = f (TA); RthJA = 750 K / W 7 Version 1.
PAGE 8
BPX 82 Dimensional Drawing 4) Approximate Weight: 48.0 mg Package marking: Cathode 8 Version 1.
PAGE 9
BPX 82 TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.
PAGE 10
BPX 82 Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 11
BPX 82 Glossary 1) IPCEmin: IPCEmin is the min. photocurrent of the specified group. 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.