Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsLEDsSMD LED OSLON SSL 80 634nm Red 1212 350mA

GR CS8PM1.23

Version 1.5 | 2019-04-19

Produktdatenblatt | Version 1.1

www.osram-os.com

Applications

GR CS8PM1.23

OSLON

SSL 80

New, higher performing OSLON SSL family LED with

well known superior robustness, high reliability, long

lifetime, low thermal resistance. Perfectly addressing

applications demanding for high e󰘲ciency and long

lifetime requirement.

— Architecture

Features:

— Package: SMT ceramic package with silicone lens

— Typ. Radiation: 80°

— Corrosion Robustness Class: 3B

— Lumen maintenance: Test results according to IESNA LM-80 available

— ESD: 8 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B)

— Luminous Flux: typ. 70 lm

— Luminous e󰘲cacy: typ. 95 lm/W

Summary of content (22 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 GR CS8PM1.23 GR CS8PM1.23 OSLON ® SSL 80 New, higher performing OSLON SSL family LED with well known superior robustness, high reliability, long lifetime, low thermal resistance. Perfectly addressing applications demanding for high efficiency and long lifetime requirement. Applications ——Architecture Features: ——Package: SMT ceramic package with silicone lens ——Typ.
PAGE 2
GR CS8PM1.23 Ordering Information Type Luminous Flux 1) IF = 350 mA ΦV Ordering Code GR CS8PM1.23-JTKP-1 61.0 ... 76.3 lm Q65112A2500 GR CS8PM1.23-JUKQ-1 65.8 ... 82.0 lm Q65112A0771 2 Version 1.
PAGE 3
GR CS8PM1.23 Maximum Ratings Parameter Symbol Operating Temperature Top min. max. -40 °C 125 °C Storage Temperature Tstg min. max. -40 °C 125 °C Junction Temperature Tj max. 135 °C Forward current IF min. max. 100 mA 1000 mA Surge Current t ≤ 10 µs; D = 0.005 ; TJ = 25 °C IFS max. 2000 mA Reverse current 2) IR max. 200 mA ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) VESD 3 Version 1.
PAGE 4
GR CS8PM1.23 Characteristics IF = 350 mA; TJ = 25 °C Parameter Symbol Peak Wavelength λpeak typ. 634.0 nm Dominant Wavelength 3) IF = 350 mA λdom min. typ. max. 620.0 nm 623.0 nm 632.0 nm Spectral Bandwidth at 50% Irel,max ∆λ typ. 16.0 nm Viewing angle at 50% IV 2φ typ. 80 ° Forward Voltage 4) IF = 350 mA VF min. typ. max. 1.90 V 2.10 V 2.50 V Reverse voltage 2) IR = 20 mA VR max. 1.2 V Electrical thermal resistance junction/solderpoint with efficiency ηe = 53 % RthJS elec.
PAGE 5
GR CS8PM1.23 Brightness Groups Group Luminous Flux 1) IF = 350 mA min. ΦV Luminous Flux 1) IF = 350 mA max. ΦV JT 61.0 lm 65.8 lm JU 65.8 lm 71.0 lm KP 71.0 lm 76.3 lm KQ 76.3 lm 82.0 lm Wavelength Groups Group 1 Dominant Wavelength 3) IF = 350 mA min. λdom 620.0 nm 5 Version 1.5 | 2019-04-19 Dominant Wavelength 3) IF = 350 mA max. λdom 632.
PAGE 6
GR CS8PM1.23 Group Name on Label Example: JT-1 Brightness Wavelength JT 1 6 Version 1.
PAGE 7
GR CS8PM1.23 Relative Spectral Emission 5) Irel = f (λ); IF = 350 mA; TJ = 25 °C Irel GR CS8PM1.23 1,0 : Vλ : red 0,8 0,6 0,4 0,2 0,0 350 400 450 500 550 600 650 700 750 800 λ [nm] Radiation Characteristics 5) Irel = f (ϕ); TJ = 25 °C GR CS8PM1.23 ϕ [°] -40° -50° -20° -10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1,0 -30° 0,8 0,6 -60° -70° -80° -90° -100° 7 Version 1.
PAGE 8
GR CS8PM1.23 Forward current Relative Luminous Flux 5), 6) IF = f(VF); TJ = 25 °C IF [mA] 5), 6) Φv/Φv(350 mA) = f(IF); TJ = 25 °C GR CS8PM1.23 1000 ΦV GR CS8PM1.23 3 ΦV(350mA) 2 800 1 600 0 -1 400 -2 200 Dominant Wavelength 5) Δλdom = f(IF); TJ = 25 °C ∆λ dom [nm] GR CS8PM1.23 10 5 0 -5 10 00 80 0 60 0 40 0 10 0 20 0 -10 IF [mA] 8 Version 1.
PAGE 9
GR CS8PM1.23 Forward Voltage Relative Luminous Flux 5) ΔVF = VF - VF(25 °C) = f(Tj); IF = 350 mA ∆VF [V] 5) Φv/Φv(25 °C) = f(Tj); IF = 350 mA GR CS8PM1.23 Φv 0,20 GR CS8PM1.23 1,6 Φv(25°C) 1,4 0,15 1,2 0,10 1,0 0,05 0,8 0,00 0,6 -0,05 0,4 -0,10 -0,15 -40 -20 0,2 0 20 40 60 80 100 120 Tj [°C] Dominant Wavelength 5) Δλdom = λdom - λdom(25 °C) = f(Tj); IF = 350 mA ∆λ dom [nm] GR CS8PM1.23 20 10 0 -10 -20 -40 -20 0 20 40 60 80 100 120 Tj [°C] 9 Version 1.
PAGE 10
GR CS8PM1.23 Max. Permissible Forward Current IF = f(T) GR CS8PM1.23 IF / mA 1000 900 800 700 600 500 400 300 200 100 Do not use below 100 mA 0 0 20 40 60 10 Version 1.
PAGE 11
GR CS8PM1.23 Dimensional Drawing 7) Further Information Approximate Weight: 25.0 mg Package marking: Anode Corrosion test: Class: 3B Test condition: 40°C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC 60068-2-43) ESD advice: The device is protected by ESD device which is connected in parallel to the Chip. 11 Version 1.
PAGE 12
GR CS8PM1.23 Recommended Solder Pad IRRW SULQW 7) &X DUHD VROGHU UHVLVW VROGHU VWHQFLO For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Further information can be found in our Application Note: “Handling and Processing Details for Ceramic LEDs”. 12 Version 1.
PAGE 13
GR CS8PM1.23 Reflow Soldering Profile Product complies to MSL Level 2 acc.
PAGE 14
GR CS8PM1.23 Taping 7) 14 Version 1.
PAGE 15
GR CS8PM1.23 Tape and Reel 8) Reel Dimensions A 180 mm W Nmin 12 + 0.3 / - 0.1 mm 15 Version 1.5 | 2019-04-19 W1 60 mm W2 max 12.4 + 2 mm 18.
PAGE 16
GR CS8PM1.23 Barcode-Product-Label (BPL) Dry Packing Process and Materials 7) Moisture-sensitive label or print L E E V l e be sela ). k, H de L If an bl r co ba (R id m ity . H R hu 0% e e /6 tiv ˚C la ared ag ck re fr 30 _ < in pa % k of to 90 rs ea s d ). rs ou or te (p on rs H de , ou iti H an bjec ng ou rs co ˚C 72 si nd H ou 5 te 48 ˚C su es e H co ± 24 6 da e y 40 be oc tim ˚C e or < ith tim ill pr). or ct w O w nt 23 tim e at lo or fa M TO F s al tim at le ˚C at lo at or e.
PAGE 17
GR CS8PM1.23 Schematic Transportation Box 7) Barcode label N O : (Q )Q TY :2 00 0 (9 D ) D /C :0 (X ) Packing Sealing label Length 195 ± 5 mm 195 ± 5 mm 17 Version 1.
PAGE 18
GR CS8PM1.23 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 19
GR CS8PM1.23 Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you.
PAGE 20
GR CS8PM1.23 Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of +/- 7%. 2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse operation is not allowed. 3) Wavelength: The wavelength is measured at a current pulse of typically 10 ms, with a tolerance of ± 0.5 nm. 4) Forward Voltage: The Forward voltage is measured during a current pulse duration of typically 1 ms with a tolerance of ± 0.
PAGE 21
GR CS8PM1.23 Revision History Version Date Change 1.5 2019-04-19 New Layout Ordering Information 21 Version 1.