www.osram-os.com Produktdatenblatt | Version 1.1 GW CSSRM3.PM GW CSSRM3.PM OSLON ® Square Fifth generation of OSLON Square with enhanced performance. Most compact high-power LED with well known superior robustness, high reliability, long lifetime and low thermal resistance. Applications ——Highbay Industrial ——Street, Tunnel and Outdoor Features: ——Package: SMT ceramic package with silicone lens ——Typ.
GW CSSRM3.PM Ordering Information Type Color temperature Luminous Flux 1) IF = 700 mA ΦV Ordering Code GW CSSRM3.PM-M8MF-A10310-1 2200 K 250 ... 280 lm Q65112A7537 GW CSSRM3.PM-M8MF-XX510-1 2200 K 250 ... 280 lm Q65112A7538 GW CSSRM3.PM-M9N1-A939-1 2500 K 260 ... 290 lm Q65112A7539 GW CSSRM3.PM-M9N1-XX59-1 2500 K 260 ... 290 lm Q65112A7540 GW CSSRM3.PM-MFN2-A838-1 2700 K 270 ... 300 lm Q65112A7541 GW CSSRM3.PM-MFN2-XX58-1 2700 K 270 ... 300 lm Q65112A7542 GW CSSRM3.
GW CSSRM3.PM Maximum Ratings Parameter Symbol Values Operating Temperature Top min. max. -40 °C 125 °C Storage Temperature Tstg min. max. -40 °C 125 °C Junction temperature absolute ** Tj,abs max. 150 °C Junction Temperature Tj max. 135 °C Forward Current TJ = 85 °C IF min. max. 100 mA 1800 mA Surge Current t ≤ 10 µs; D = 0.005 ; TJ = 85 °C IFS max. 2000 mA Reverse current 2) IR max. 200 mA ESD withstand voltage acc.
GW CSSRM3.PM Characteristics IF = 700 mA; TJ = 85 °C Parameter Symbol Viewing angle at 50% IV 2φ typ. 120 ° Forward Voltage 3) VF min. typ. max. 2.70 V 2.80 V 3.20 V Reverse voltage 2) IR = 20 mA VR max. 1.2 V Color Rendering Index 4) (2200K - 6500K) CRI min. typ. 70 72 Electrical thermal resistance junction/solderpoint with efficiency ηe = 41 % RthJS elec. typ. 1.8 K / W 4 Version 1.
GW CSSRM3.PM Brightness Groups Group Luminous Flux 1) IF = 700 mA min. ΦV Luminous Flux 1) IF = 700 mA max. ΦV M8 250 lm 260 lm M9 260 lm 270 lm MF 270 lm 280 lm N1 280 lm 290 lm N2 290 lm 300 lm N3 300 lm 310 lm N4 310 lm 320 lm N5 320 lm 330 lm N6 330 lm 340 lm N7 340 lm 350 lm N8 350 lm 360 lm Forward Voltage Groups Group Forward Voltage 3) min. VF Forward Voltage 3) max. VF K2 2.70 V 2.80 V L1 2.80 V 2.90 V 2.90 V 3.00 V 3.00 V 3.10 V 3.10 V 3.
GW CSSRM3.PM Chromaticity Coordinate Groups 6 Version 1.
GW CSSRM3.PM Chromaticity Coordinate Groups CCT Center Cx Center Cy 3step a 3step b 5step a 5step b Ø 2200 K 0.5020 0.4156 0.0072 0.0040 0.0120 0.0067 39.9 2500 K 0.4804 0.4138 0.0076 0.0041 0.0126 0.0068 53.1 2700 K 0.4577 0.4098 0.0080 0.0041 0.0133 0.0068 54.1 3000 K 0.4339 0.4032 0.0086 0.0042 0.0142 0.0069 53.7 3500 K 0.4077 0.3929 0.0093 0.0042 0.0155 0.0069 53.9 4000 K 0.3818 0.3796 0.0094 0.0041 0.0157 0.0068 53.4 4500 K 0.3613 0.3669 0.
GW CSSRM3.PM 1 CCT 2200 K 2500 K 2700 K 3 4 5 Group Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy A 0.5155 0.4347 0.5044 0.4344 0.4921 0.4156 0.4941 0.4156 0.5088 0.4249 B 0.5155 0.4347 0.5265 0.4350 0.5132 0.4163 0.5101 0.4161 0.5088 0.4249 C 0.5132 0.4163 0.4998 0.3975 0.4898 0.3971 0.4955 0.4054 0.5101 0.4161 D 0.4955 0.4054 0.4941 0.4156 0.4921 0.4156 0.4798 0.3967 0.4898 0.3971 E 0.5088 0.4249 0.4941 0.4156 0.4973 0.4157 0.5061 0.4210 F 0.
GW CSSRM3.PM 3500 K 4000 K 4500 K 0.4131 0.4093 0.4003 0.4034 0.3949 0.3871 0.3977 0.3883 0.4118 0.4054 B 0.4131 0.4093 0.4302 0.4171 0.4227 0.3997 0.4177 0.3975 0.4118 0.4054 C 0.4227 0.3997 0.4149 0.3819 0.4022 0.3763 0.4036 0.3804 0.4177 0.3975 D 0.4036 0.3804 0.3977 0.3883 0.3949 0.3871 0.3895 0.3707 0.4022 0.3763 E 0.4118 0.4054 0.3977 0.3883 0.4017 0.3902 0.4102 0.4004 F 0.4118 0.4054 0.4177 0.3975 0.4137 0.3957 0.4102 0.4004 G 0.
GW CSSRM3.PM 5700 K 6500 K A 0.3280 0.3539 0.3205 0.3475 0.3212 0.3373 0.3283 0.3502 B 0.3280 0.3539 0.3375 0.3619 0.3370 0.3493 0.3363 0.3486 0.3283 0.3502 C 0.3370 0.3493 0.3366 0.3372 0.3294 0.3314 0.3291 0.3348 0.3363 0.3486 D 0.3291 0.3348 0.3215 0.3337 0.3221 0.3255 0.3294 0.3314 E 0.3283 0.3502 0.3212 0.3373 0.3213 0.3365 0.3242 0.3388 0.3284 0.3471 F 0.3283 0.3502 0.3363 0.3486 0.3332 0.3462 0.3284 0.3471 G 0.3363 0.3486 0.3291 0.
GW CSSRM3.PM Group Name on Label Example: M8-K2 Brightness Forward Voltage M8 K2 11 Version 1.
GW CSSRM3.PM Relative Spectral Emission 6) Φrel = f (λ); IF = 700 mA; TJ = 85 °C Φrel GW CSSRM3.PM 1,0 : Vλ : white 0,8 0,6 0,4 0,2 0,0 350 400 Radiation Characteristics 450 500 550 600 650 700 750 800 λ / nm 6) Irel = f (ϕ); TJ = 85 °C GW CSSRM3.PM ϕ/° -40° -50° -20° -10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1,0 -30° 0,8 0,6 -60° -70° 0,4 0,2 -90° 0,0 -80° 12 Version 1.
GW CSSRM3.PM Forward current Relative Luminous Flux 6), 7) IF = f(VF); TJ = 85 °C IF / mA 6), 7) Φv/Φv(700 mA) = f(IF); TJ = 85 °C GW CSSRM3.PM 1800 ΦV 3 GW CSSRM3.PM ΦV(700mA) 1600 2 1400 1200 1 1000 0 800 600 -1 400 2,90 3,01 VF / V Chromaticity Coordinate Shift 6) ΔCx, ΔCy = f(IF); TJ = 85 °C ∆Cx ∆Cy 0,008 0,006 0,004 0,002 GW CSSRM3.PM : ∆ Cx : ∆ Cy 0,000 -0,002 -0,004 -0,006 18 00 14 00 40 0 60 0 80 0 10 00 10 0 -0,008 IF / mA 13 Version 1.
GW CSSRM3.PM Forward Voltage Relative Luminous Flux 6) ΔVF = VF - VF(85 °C) = f(Tj); IF = 700 mA Φv/Φv(85 °C) = f(Tj); IF = 700 mA GW CSSRM3.PM ∆VF / V 6) Φv 0,20 1,2 GW CSSRM3.PM Φv(85°C) 1,0 0,15 0,8 0,10 0,6 0,05 0,4 0,00 0,2 -0,05 -40 -20 0 20 40 60 80 100 120 Tj / °C Chromaticity Coordinate Shift 6) ΔCx, ΔCy = f(Tj); IF = 700 mA ∆Cx ∆Cy 0,02 0,01 0,00 GW CSSRM3.PM : ∆ Cx : ∆ Cy -0,01 -0,02 -0,03 -0,04 -40 -20 0 20 40 60 80 100 120 Tj / °C 14 Version 1.
GW CSSRM3.PM Max. Permissible Forward Current IF = f(T) IF / mA 1900 1800 1700 1600 1500 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 GW CSSRM3.PM 0 20 40 60 15 Version 1.
GW CSSRM3.PM Dimensional Drawing 8) Further Information Approximate Weight: 29.0 mg Package marking: Cathode Corrosion test: Class: 3B Test condition: 40°C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC 60068-2-43) ESD advice: The device is protected by ESD device which is connected in parallel to the Chip. 16 Version 1.
GW CSSRM3.PM Recommended Solder Pad IRRW SULQW 8) &X DUHD VROGHU UHVLVW VROGHU VWHQFLO For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Further information can be found in our Application Note: “Handling and Processing Details for Ceramic LEDs”. 17 Version 1.
GW CSSRM3.PM Reflow Soldering Profile Product complies to MSL Level 2 acc.
GW CSSRM3.PM Taping 8) 19 Version 1.
GW CSSRM3.PM Tape and Reel 9) Reel Dimensions A 180 mm W Nmin 12 + 0.3 / - 0.1 mm 20 Version 1.3 | 2019-04-22 W1 60 mm W2 max 12.4 + 2 mm 18.
GW CSSRM3.PM Barcode-Product-Label (BPL) Dry Packing Process and Materials 8) Moisture-sensitive label or print L E E V l e be sela ). k, H de L If an bl r co ba (R id m ity . H R hu 0% e e /6 tiv ˚C la ared ag ck re fr 30 _ < in pa % k of to 90 rs ea s d ). rs ou or te (p on rs H de , ou iti H an bjec ng ou rs co ˚C 72 si nd H ou 5 te 48 ˚C su es e H co ± 24 6 da e y 40 be oc tim ˚C e or < ith tim ill pr). or ct w O w nt 23 tim e at lo or fa M TO F s al tim at le ˚C at lo at or e.
GW CSSRM3.PM Schematic Transportation Box 8) Barcode label N O : (Q )Q TY :2 00 0 (9 D ) D /C :0 (X ) Packing Sealing label Length 195 ± 5 mm 195 ± 5 mm 22 Version 1.
GW CSSRM3.PM Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class moderate risk (exposure time 0.25 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
GW CSSRM3.PM Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you.
GW CSSRM3.PM Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of +/- 7%. 2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse operation is not allowed. 3) Forward Voltage: The Forward voltage is measured during a current pulse duration of typically 1 ms with a tolerance of ± 0.05V .
GW CSSRM3.PM Revision History Version Date Change 1.1 2019-01-08 Characteristics Electro - Optical Characteristics (Diagrams) Derating (Diagrams) 1.2 2019-02-07 Ordering Information 1.2 2019-02-07 Ordering Information 1.2 2019-02-08 Ordering Information 1.2 2019-02-12 Ordering Information 1.3 2019-02-27 Features Characteristics 1.3 2019-02-27 Features Characteristics 1.3 2019-04-16 Features Characteristics 1.3 2019-04-22 Disclaimer 26 Version 1.
GW CSSRM3.PM Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved. 27 Version 1.