Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsLEDsSMD LED OSCONIQ S 3030 White 65mA

GW QSLM31.EM

Version 1.4 | 2019-07-01

Produktdatenblatt | Version 1.1

www.osram-os.com

Applications

GW QSLM31.EM

OSCONIQ

S 3030

This is professional version of EMC 3030 footprint.

Longer lifetime, lower thermal resistance and higher

performance.

— Area Lights — Horticulture Lighting

Features:

— Package: white SMT package, colored di󰘯used silicone resin

— Typ. Radiation: 120° (Lambertian emitter)

— Color temperature: 2700K - 6500K

— CRI: 80 (min.), 82 (typ.)

— ESD: 8 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B)

— Luminous Flux: typ. 36.2 lm @ 4000 K

— Luminous e󰘲cacy: typ. 205 lm/W @ 4000 K

Summary of content (25 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 GW QSLM31.EM GW QSLM31.EM OSCONIQ ® S 3030 This is professional version of EMC 3030 footprint. Longer lifetime, lower thermal resistance and higher performance. Applications ——Area Lights ——Horticulture Lighting Features: ——Package: white SMT package, colored diffused silicone resin ——Typ. Radiation: 120° (Lambertian emitter) ——Color temperature: 2700K - 6500K ——CRI: 80 (min.), 82 (typ.) ——ESD: 8 kV acc.
PAGE 2
GW QSLM31.EM Ordering Information Type Color temperature Luminous Flux 1) IF = 65 mA ΦV Ordering Code GW QSLM31.EM-H2H4-XX58-1 2700 K 30.0 ... 34.5 lm Q65112A7187 GW QSLM31.EM-H3H7-XX57-1 3000 K 31.5 ... 39.0 lm Q65112A7186 GW QSLM31.EM-H4H8-XX56-1 3500 K 33.0 ... 40.5 lm Q65112A7192 GW QSLM31.EM-H4H8-XX55-1 4000 K 33.0 ... 40.5 lm Q65112A7191 GW QSLM31.EM-H5H9-XX53-1 5000 K 34.5 ... 42.0 lm Q65112A7190 GW QSLM31.EM-H4H8-XX52-1 5700 K 33.0 ... 40.5 lm Q65112A7189 GW QSLM31.
PAGE 3
GW QSLM31.EM Maximum Ratings Parameter Symbol Operating Temperature Top min. max. -40 °C 105 °C Storage Temperature Tstg min. max. -40 °C 105 °C Junction Temperature Tj max. 125 °C Forward Current TJ = 25 °C IF min. max. 10 mA 200 mA Surge Current t ≤ 10 µs; D = 0.005 ; TJ = 25 °C IFS max. 400 mA Reverse current 2) IR max. 200 mA ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) VESD 3 Version 1.
PAGE 4
GW QSLM31.EM Characteristics IF = 65 mA; TJ = 25 °C Parameter Symbol Viewing angle at 50% IV 2φ typ. 120 ° Forward Voltage 3) VF min. typ. max. 2.60 V 2.72 V 2.95 V Reverse voltage 2) IR = 20 mA VR max. 1.2 V Color Rendering Index 4) (2700K - 6500K) CRI min. typ. 80 82 Electrical thermal resistance junction/solderpoint with efficiency ηe = 60 % RthJS elec. typ. 8.6 K / W 4 Version 1.
PAGE 5
GW QSLM31.EM Brightness Groups Group Luminous Flux 1) IF = 65 mA min. ΦV Luminous Flux 1) IF = 65 mA max. ΦV H2 30.0 lm 31.5 lm H3 31.5 lm 33.0 lm H4 33.0 lm 34.5 lm H5 34.5 lm 36.0 lm H6 36.0 lm 37.5 lm H7 37.5 lm 39.0 lm H8 39.0 lm 40.5 lm H9 40.5 lm 42.0 lm Forward Voltage Groups Group Forward Voltage 3) min. VF Forward Voltage 3) max. VF 1T 2.60 V 2.65 V 1U 2.65 V 2.70 V 1V 2.70 V 2.75 V 1W 2.75 V 2.80 V 1Y 2.80 V 2.85 V 2.85 V 2.90 V 2.90 V 2.
PAGE 6
GW QSLM31.EM Chromaticity Coordinate Groups 6 Version 1.
PAGE 7
GW QSLM31.EM Chromaticity Coordinate Groups CCT Center Cx Center Cy 3step a 3step b 5step a 5step b Ø 2700 K 0.4577 0.4098 0.008 0.0041 0.0133 0.0068 54.1 3000 K 0.4339 0.4032 0.0086 0.0042 0.0142 0.0069 53.7 3500 K 0.4077 0.3929 0.0093 0.0042 0.0155 0.0069 53.9 4000 K 0.3818 0.3796 0.0094 0.0041 0.0157 0.0068 53.4 5000 K 0.3446 0.3551 0.0081 0.0035 0.0135 0.0059 59.8 5700 K 0.3287 0.3425 0.0072 0.0032 0.0119 0.0052 58.8 6500 K 0.3123 0.3282 0.
PAGE 8
GW QSLM31.EM 1 CCT 2700 K 3000 K 3500 K 4000 K 5000 K 5700 K 3 4 5 Group Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy E 0.4637 0.4212 0.4491 0.4081 0.4526 0.4088 0.4613 0.4166 F 0.4637 0.4212 0.4663 0.4115 0.4628 0.4108 0.4613 0.4166 G 0.4663 0.4115 0.4517 0.3984 0.4541 0.4030 0.4628 0.4108 H 0.4541 0.4030 0.4526 0.4088 0.4491 0.4081 0.4517 0.3984 E 0.4393 0.4153 0.4246 0.4002 0.4283 0.4014 0.4371 0.4105 F 0.4393 0.4153 0.4432 0.4062 0.4395 0.
PAGE 9
GW QSLM31.EM Group Name on Label Example: H2-1T Brightness Forward Voltage H2 1T 9 Version 1.
PAGE 10
GW QSLM31.EM Relative Spectral Emission 6) Φrel = f (λ); IF = 65 mA; TJ = 25 °C Φrel GW QSLM31.EM 1,0 : Vλ : white 0,8 0,6 0,4 0,2 0,0 350 400 Radiation Characteristics 450 500 550 600 650 700 750 800 λ / nm 6) Irel = f (ϕ); TJ = 25 °C GW QSLM31.EM ϕ/° -40° -50° -20° -10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1,0 -30° 0,8 0,6 -60° -70° 0,4 -80° 0,2 -90° 0,0 -100° 10 Version 1.
PAGE 11
GW QSLM31.EM Forward current Relative Luminous Flux 6) IF = f(VF); TJ = 25 °C IF / mA Φv/Φv(65 mA) = f(IF); TJ = 25 °C GW QSLM31.EM ΦV GW QSLM31.EM 200 6), 7) ΦV(65mA) 3,0 180 2,5 160 140 2,0 120 1,5 100 80 1,0 60 0,5 40 Chromaticity Coordinate Shift 6) ΔCx, ΔCy = f(IF); TJ = 25 °C ∆Cx ∆Cy GW QSLM31.EM 0,02 : ∆ Cx : ∆ Cy 0,01 0,00 -0,01 20 0 16 0 12 0 80 40 60 10 -0,02 IF / mA 11 Version 1.
PAGE 12
GW QSLM31.EM Forward Voltage Relative Luminous Flux 6) ΔVF = VF - VF(25 °C) = f(Tj); IF = 65 mA ∆VF / V 0,3 6) Φv/Φv(25 °C) = f(Tj); IF = 65 mA GW QSLM31.EM Φv 1,2 GW QSLM31.EM Φv(25°C) 1,0 0,2 0,8 0,1 0,6 0,0 0,4 -0,1 -0,2 -40 -20 0 0,2 20 40 60 80 100 120 Tj / °C Chromaticity Coordinate Shift 6) ΔCx, ΔCy = f(Tj); IF = 65 mA ∆Cx ∆Cy 0,03 0,02 0,01 GW QSLM31.EM : ∆ Cx : ∆ Cy 0,00 -0,01 -0,02 20 40 60 80 100 120 Tj / °C -0,03 -40 -20 0 12 Version 1.
PAGE 13
GW QSLM31.EM Max. Permissible Forward Current IF = f(T) IF / mA GW QSLM31.EM 220 200 180 160 140 120 100 80 60 40 20 0 Don't use below 10 mA 0 20 40 60 13 Version 1.
PAGE 14
GW QSLM31.EM Dimensional Drawing 8) Further Information Approximate Weight: 18.0 mg Package marking: Cathode ESD advice: The device is protected by ESD device which is connected in parallel to the Chip. 14 Version 1.
PAGE 15
GW QSLM31.EM Recommended Solder Pad 8) For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning. 15 Version 1.
PAGE 16
GW QSLM31.EM Reflow Soldering Profile Product complies to MSL Level 3 acc.
PAGE 17
GW QSLM31.EM Taping 8) 17 Version 1.
PAGE 18
GW QSLM31.EM Tape and Reel 9) Reel Dimensions A 180 mm W Nmin 8 + 0.3 / - 0.1 mm 18 Version 1.4 | 2019-07-01 W1 60 mm W2 max 8.4 + 2 mm 14.
PAGE 19
GW QSLM31.EM Barcode-Product-Label (BPL) Dry Packing Process and Materials 8) Moisture-sensitive label or print L E E V l e be sela ). k, H de L If an bl r co ba (R id m ity . H R hu 0% e e /6 tiv ˚C la ared ag ck re fr 30 _ < in pa % k of to 90 rs ea s d ). rs ou or te (p on rs H de , ou iti H an bjec ng ou rs co ˚C 72 si nd H ou 5 te 48 ˚C su es e H co ± 24 6 da e y 40 be oc tim ˚C e or < ith tim ill pr). or ct w O w nt 23 tim e at lo or fa M TO F s al tim at le ˚C at lo at or e.
PAGE 20
GW QSLM31.EM Schematic Transportation Box 8) Barcode label N O : (Q )Q TY :2 00 0 (9 D ) D /C :0 (X ) Packing Sealing label Length 200 ± 5 mm 195 ± 5 mm 20 Version 1.
PAGE 21
GW QSLM31.EM Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class moderate risk (exposure time 0.25 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 22
GW QSLM31.EM Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you.
PAGE 23
GW QSLM31.EM Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of +/- 5%. 2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse operation is not allowed. 3) Forward Voltage: The Forward voltage is measured during a current pulse duration of typically 1 ms with a tolerance of ± 0.05V .
PAGE 24
GW QSLM31.EM Revision History Version Date Change 1.0 2019-02-22 Initial Version 1.1 2019-03-06 Features 1.1 2019-03-06 Features Electro - Optical Characteristics (Diagrams) 1.2 2019-03-27 Tape and Reel Reel Dimensions Dimensions of Transportation Box 1.2 2019-03-27 Taping Reel Dimensions Dimensions of Transportation Box 1.3 2019-06-10 Maximum Ratings Electro - Optical Characteristics (Diagrams) Derating (Diagrams) 1.