Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsLEDsSMD LED OSCONIQ P 3030 610nm Orange 350mA

GY QSSPA1.13

Version 1.0 | 2019-07-25

Produktdatenblatt | Version 1.1

www.osram-os.com

Applications

GY QSSPA1.13

OSCONIQ

P 3030

The OSCONIQ P 3030 Colors family LED comes

with well known superior robustness, high reliability,

long lifetime, low thermal resistance. Compact and

proven 3mm x 3mm package and established foot-

print. Perfectly addressing applications that demand

for high e󰘲ciency and long lifetime.

— Accent (BAR)

— Architecture

— Stage Lighting (LED & Laser)

Features:

— Package: SMD epoxy package

— Typ. Radiation: 120° (Lambertian emitter)

— Corrosion Robustness Class: 3B

— ESD: 8 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B)

— Luminous Flux: typ. 100 lm

— Luminous E󰘲cacy: typ. 98 lm/W

Summary of content (23 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 GY QSSPA1.13 GY QSSPA1.13 OSCONIQ ® P 3030 The OSCONIQ P 3030 Colors family LED comes with well known superior robustness, high reliability, long lifetime, low thermal resistance. Compact and proven 3mm x 3mm package and established footprint. Perfectly addressing applications that demand for high efficiency and long lifetime. Applications ——Stage Lighting (LED & Laser) ——Accent (BAR) ——Architecture Features: ——Package: SMD epoxy package ——Typ.
PAGE 2
GY QSSPA1.13 Ordering Information Type Luminous Flux 1) IF = 350 mA ΦV GY QSSPA1.13-KSKU-5F5G-1 2 Version 1.0 | 2019-07-25 89.2 ... 112.
PAGE 3
GY QSSPA1.13 Maximum Ratings Parameter Symbol Operating Temperature Top min. max. -40 °C 125 °C Storage Temperature Tstg min. max. -40 °C 125 °C Junction Temperature Tj max. 135 °C Forward current IF min. max. 100 mA 1300 mA Surge Current t ≤ 10 µs; D = 0.005 ; TJ = 25 °C IFS max. 2000 mA Reverse voltage 2) VR ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) VESD 3 Version 1.
PAGE 4
GY QSSPA1.13 Characteristics IF = 350 mA; TJ = 25 °C Parameter Symbol Viewing angle at 50% IV 2φ typ. 120 ° Forward Voltage 3) IF = 350 mA VF min. typ. max. 2.70 V 2.90 V 3.20 V Reverse current 2) IR Electrical thermal resistance junction/solderpoint with efficiency ηe = 35 % RthJS elec. 4 Version 1.0 | 2019-07-25 Values Not designed for reverse operation typ. 6.
PAGE 5
GY QSSPA1.13 Brightness Groups Group Luminous Flux 1) IF = 350 mA min. ΦV Luminous Flux 1) IF = 350 mA max. ΦV KS 89.2 lm 97.0 lm KT 97.0 lm 104.2 lm KU 104.2 lm 112.0 lm Forward Voltage Groups Group Forward Voltage 3) IF = 350 mA min. VF Forward Voltage 3) IF = 350 mA max. VF K2 2.70 V 2.80 V L1 2.80 V 2.90 V L2 2.90 V 3.00 V M1 3.00 V 3.10 V M2 3.10 V 3.20 V 5 Version 1.
PAGE 6
GY QSSPA1.13 Chromaticity Coordinate Groups 4) Chromaticity Coordinate Groups Group Cx Cy Group Cx Cy 5F 0.5606 0.4250 5G 0.5536 0.4221 0.5705 0.4289 0.5606 0.4250 0.5883 0.4111 0.5780 0.4080 0.5780 0.4080 0.5765 0.4075 6 Version 1.
PAGE 7
GY QSSPA1.13 Group Name on Label Example: KS-5F-K2 Brightness Color Chromaticity KS 5F 7 Version 1.
PAGE 8
GY QSSPA1.13 Relative Spectral Emission 5) Φrel = f (λ); IF = 350 mA; TJ = 25 °C Φrel GY QSSPA1.13 1,0 : Vλ : yellow 0,8 0,6 0,4 0,2 0,0 350 400 Radiation Characteristics 450 500 550 600 650 700 750 800 λ / nm 5) Irel = f (ϕ); TJ = 25 °C GY QSSPA1.13 ϕ/° -40° -50° -20° -10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1,0 -30° 0,8 0,6 -60° -70° 0,4 0,2 -90° 0,0 -80° 8 Version 1.
PAGE 9
GY QSSPA1.13 Forward current Relative Luminous Flux 5) IF = f(VF); TJ = 25 °C IF / mA 5), 6) Φv/Φv(350 mA) = f(IF); TJ = 25 °C GY QSSPA1.13 1300 ΦV GY QSSPA1.13 3,0 ΦV(350mA) 1200 2,5 1000 2,0 800 1,5 600 1,0 400 0,5 200 Chromaticity Coordinate Shift 5) ΔCx, ΔCy = f(IF); TJ = 25 °C ∆Cx ∆Cy GY QSSPA1.13 0,02 : ∆ Cx : ∆ Cy 0,01 0,00 -0,01 13 00 10 00 80 0 60 0 40 0 10 0 -0,02 IF / mA 9 Version 1.
PAGE 10
GY QSSPA1.13 Forward Voltage Relative Luminous Flux 5) ΔVF = VF - VF(25 °C) = f(Tj); IF = 350 mA ∆VF / V 0,2 5) Φv/Φv(25 °C) = f(Tj); IF = 350 mA GY QSSPA1.13 Φv 1,2 GY QSSPA1.13 Φv(25°C) 1,0 0,1 0,8 0,0 0,6 0,4 -0,1 0,2 -0,2 -40 -20 0 20 40 60 80 100 120 Tj / °C Chromaticity Coordinate Shift 5) ΔCx, ΔCy = f(Tj); IF = 350 mA ∆Cx ∆Cy 0,03 0,02 0,01 GY QSSPA1.13 : ∆ Cx : ∆ Cy 0,00 -0,01 -0,02 -0,03 -40 -20 0 20 40 60 80 100 120 Tj / °C 10 Version 1.
PAGE 11
GY QSSPA1.13 Max. Permissible Forward Current IF = f(T) IF / mA GY QSSPA1.13 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 0 20 40 60 11 Version 1.
PAGE 12
GY QSSPA1.13 Dimensional Drawing 7) Further Information Approximate Weight: 24.0 mg Package marking: Anode Corrosion test: Class: 3B Test condition: 40°C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC 60068-2-43) ESD advice: The device is protected by ESD device which is connected in parallel to the Chip. 12 Version 1.
PAGE 13
GY QSSPA1.13 Recommended Solder Pad 7) For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning. 13 Version 1.
PAGE 14
GY QSSPA1.13 Reflow Soldering Profile Product complies to MSL Level 2 acc.
PAGE 15
GY QSSPA1.13 Taping 7) 15 Version 1.
PAGE 16
GY QSSPA1.13 Tape and Reel 8) Reel Dimensions A 180 mm W Nmin 12 + 0.3 / - 0.1 mm 16 Version 1.0 | 2019-07-25 W1 60 mm W2 max 12.4 + 2 mm 18.
PAGE 17
GY QSSPA1.13 Barcode-Product-Label (BPL) Dry Packing Process and Materials 7) Moisture-sensitive label or print L E E V l e be sela ). k, H de L If an bl r co ba (R id m ity . H R hu 0% e e /6 tiv ˚C la ared ag ck re fr 30 _ < in pa % k of to 90 rs ea s d ). rs ou or te (p on rs H de , ou iti H an bjec ng ou rs co ˚C 72 si nd H ou 5 te 48 ˚C su es e H co ± 24 6 da e y 40 be oc tim ˚C e or < ith tim ill pr). or ct w O w nt 23 tim e at lo or fa M TO F s al tim at le ˚C at lo at or e.
PAGE 18
GY QSSPA1.13 Schematic Transportation Box 7) Barcode label N O : (Q )Q TY :2 00 0 (9 D ) D /C :0 (X ) Packing Sealing label Length 195 ± 5 mm 195 ± 5 mm 18 Version 1.
PAGE 19
GY QSSPA1.13 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 20
GY QSSPA1.13 Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you.
PAGE 21
GY QSSPA1.13 Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of +/- 7%. 2) Reverse Operation: Not designed for reverse operation. Continuous reverse operation can cause migration and damage of the device. 3) Forward Voltage: The Forward voltage is measured during a current pulse duration of typically 1 ms with a tolerance of ± 0.05V .
PAGE 22
GY QSSPA1.13 Revision History Version Date Change 1.0 2019-07-16 Initial Version 22 Version 1.