Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhotodiode 850 nm 150 mW TO-92

SFH 206 K

Version 1.3 | 2018-05-04

Produktdatenblatt | Version 1.1

www.osram-os.com

SFH 206 K

Radial Sidelooker

Silicon PIN Photodiode

Applications

— Electronic Equipment

— Industrial Automation (Machine controls, Light

barriers, Vision controls)

— White Goods

Features:

— Package: clear epoxy

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Especially suitable for applications from 400 nm to 1100 nm

— Short switching time (typ. 20 ns)

— 5 mm LED plastic package

— Also available on tape and reel

Ordering Information

Type Photocurrent Photocurrent Ordering Code

typ.

= 1000 lx; Std. Light A; V

= 5 V E

= 1000 lx; Std. Light A; V

= 5 V

SFH 206 K ≥ 50 µA 80 µA Q62702P0129

Summary of content (13 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 SFH 206 K SFH 206 K Radial Sidelooker Silicon PIN Photodiode Applications ——White Goods ——Electronic Equipment ——Industrial Automation (Machine controls, Light barriers, Vision controls) Features: ——Package: clear epoxy ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Especially suitable for applications from 400 nm to 1100 nm ——Short switching time (typ.
PAGE 2
SFH 206 K Maximum Ratings TA = 25 °C Parameter Symbol Operating Temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Reverse voltage VR max. 32 V Total power dissipation Ptot max. 150 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD 2 Version 1.
PAGE 3
SFH 206 K Characteristics TA = 25 °C Parameter Symbol Spectral sensitivity VR = 5 V; Std. Light A; T = 2856 K S min. typ. 50 nA/lx 80 nA/lx Wavelength of max sensitivity λS max typ. 850 nm Spectral range of sensitivity λ10% typ. 400 ... 1100 nm Radiant sensitive area A typ. 7.02 mm² Dimensions of active chip area LxW typ. 2.65 x 2.65 mm x mm Half angle φ typ. 60 ° Dark current VR = 10 V IR typ. max. Spectral sensitivity of the chip λ = 850 nm Sλ typ. 0.
PAGE 4
SFH 206 K Relative Spectral Sensitivity 1), 2) Srel = f (λ) OHF00078 100 S rel % 80 60 40 20 0 400 500 600 700 800 900 nm 1100 λ Directional Characteristics 1), 2) Srel = f (φ) 40 50 30 20 10 60 ϕ 0 1.0 0.8 0.6 70 0.4 80 0.2 0 90 1.0 0.8 100 OHF01402 4 Version 1.3 | 2018-05-04 0.6 0.
PAGE 5
SFH 206 K Photocurrent/Open-Circuit Voltage IP (VR = 5 V) / VO = f (Ev) Capacitance 1), 2) Dark Current IR = f (VR) ; E = 0 1), 2) C = f (VR); f = 1 MHz; E = 0; 5 Version 1.
PAGE 6
SFH 206 K Dark Current 2) IR = f (TA); E = 0; VR = 10 V Power Consumption Ptot = f (TA); OHF00394 160 mW Ptot 140 120 100 80 60 40 20 0 20 40 60 0 6 Version 1.
PAGE 7
SFH 206 K 3) Area not flat 6.9 (0.272) 34 (1.339) 32 (1.260) Approximate Weight: 276.0 mg Package marking: Cathode 7 Version 1.3 | 2018-05-04 Cathode 4.7 (0.185) 4.0 (0.157) 0.6 (0.024) x 0.5 (0.020) 0.4 (0.016) x 0.3 (0.012) 1.8 (0.071) 1.2 (0.047) 5.1 (0.201) 0.8 (0.031) 0.4 (0.016) 6.3 (0.248) 0.8 (0.031) Radiant sensitive area 2.54 (0.100) spacing Dimensional Drawing 4.1 (0.161) 3.7 (0.
PAGE 8
SFH 206 K Recommended Solder Pad Pad 1: anode 8 Version 1.
PAGE 9
SFH 206 K TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.
PAGE 10
SFH 206 K Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 11
SFH 206 K Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 12
SFH 206 K Glossary 1) Testing temperature: TA = 25°C 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ.